wireline in situ test sub

...remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to opening the wellhead valve. The Wireline In-Situ Test Sub allows for only the joint that was broken to be tested,

... Good performance High-toughness wear-treatment process Accuracy and interchangeability 1.Adapter sub’s description Large-scale, production-rope drill pipe joints, using imported molding tooling and produced threaded plug and ring gauges testing to

...Wireline Inflatable Packer (NQ HQ PQ) The Lugeon test, sometimes call also Packer test, is an in-situ testing method widely used to estimate the avarage hydraulic conductivity of rock mass. It is indeed In situ test of formation permeability performed by measuring the volume of water taken in a section of test...

Wireline Pump-in Sub Wireline Pressure Control Tee WPCE Crossover The Pump-in Tee/Sub is a necessary part of a wireline rig-up design, normally located above the wellhead and below the wireline BOP , the pump-in tee / pump sub is used to provide convenient entry path for large flow fluid into pressure control equipment, the pump-in sub is applied for hydrostatic testing or for well control by pumping fluids into the well below a closed wireline