lacing clamp

...Laces Abrasion Tester Shoe Laces Wear Resistance Testing Machine Instrument Introduction The shoe lace wear resistance tester measures the wear resistance of the shoe laces. The lacing device is as follows: take two shoe laces, hook the middle sections together to form one right lace and one left lace. The right lace is clamped by the right fixture (moving clamp) of this machine, and after clamping...

... part of the hook, mutual friction, to the specified number of friction or shoelace breaking record the number of friction. Technical Specifications: Maximum spacing between moving clamp and stationary clamp 310mm (Max) Clip travel 35mm Clip speed 60 + /

..., or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet. Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the

... to the simple adjustment function of different specifications. 5). New pneumatic scanning structure . 6). The high precision and uniform line collection of the electronic clamp. 7). Efficient,one every 8

... Wall/Hybrid cable Clamp Oetiker Clamp Pull Load Capacity 500lbs UV Resistance ≥1000 hours exposure in accelerated UV life chamber Closed weave hositing grips feature a closed-mesh design which simplifies installation over traditional slipt, lace-up

... is: take two shoelaces, hook the middle sections together to form one right and one left, and clamp the two ends of the right lace with the right clamp (moving clamp) of the shoelace wear tester. After clamping, the two ends are naturally 25mm apart. Then

Footwear Testing Equipment Shoe Lace-Eyelets Abrasion Tester Product information This machine is designed for the resistance of all shoelaces to abrasion.Two shoelaces are horizontally crossed in a moveable clamp, rubbing against each other, so as to ...

... unit is: take 2pcs shoelaces, The middle phase hook , forming 1pcs on right, the other on left , the machine right clamp (dynamic) holding right both ends, Clip after natural 25 mm apart on both ends, with template to assist, make right shoelace on

...used to determine the abrasion resistance of shoe laces. Shoelaces unit is: take 2pcs shoelaces, The middle phase hook , forming 1pcs on right, the other on left , the machine right clamp (dynamic) holding right both ends, Clip after natural 25 ...