iec60884 1 figure 27 and figure 42 tester

IEC60884-1 Figure 27 and Figure 42 Low Temperature Impact Test Apparatus for Testing Pin-Insulating Seelves, Plug and Socket-Outlets 1. Introduction: Low temperature impact test apparatus is designed according to IEC60884-1 clause24.4/figure 27 and clause 30.4/figure 42, IEC60811-1-4 clause 8.5, VDE0620, GB2951.4, GB2099.1 clause 24.4 and 30.4 figure 27 & figure 42...

IEC 60884-1 Figure 27 and 42 Low Temperature Impact Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device...

IEC60884-1 Figure 27 Single Station Apparatus For Impact Test At Low Temperature Mechanical Release Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.4, clause 30.4, figure 27 and figure 42. Standard description: Clause 24.4: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27...

Device For Checking The Resistance To Lateral Strain IEC60884 Fig13 Parameters: Standard IEC60884 Figure 13 Lifting heavy weights 5N Test samples socket of rated current is ≤ 16A and the voltage is ≤ 250V Application: This device confirms standard: IEC ...

Low-temperature impact test device LTI-1 Product information: The HT Apparatus for impact test at low temperature confirms to the standard of IEC60884 figure 27 and figure 42. The first one is fit for impact test of wire while the latter one is applied...

IEC 60884 Figure 21 Plug Socket Test Equipment Power Cord Flexing Tester Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 23.4 and figure 21 Application: This device is used...