iec60335 1 clause 21 2 safety tester

Dielectric Strength Test Device with 30N Loaded Hardened Steel Pin IEC60335-1 clause 21.2 1. Introduction The dielectric strength test device is designed to meet the test requirements of IEC60335-1 clause 21.2, a hardened steel pin is used as a electrode...

IEC 60335-1 clause 21.2 Electric strength test instrument for Accessible parts of solid insulation 21.2 Accessible parts of solid insulation shall have sufficient strength to prevent penetration by sharp implements. Compliance is checked by subjecting the ...

IEC60335-2-6 clause 21.102 Vessel For Dropping Test - Hotplates dropping aluminum plate Standard: This device meets the standard of IEC 60335-2-6 clause 21.102 and IEC60335-2-9 clause 21.101,Household and similar electrical appliances-Safety-Part 2-9:...

IEC60335 Hemisphere Rubber Impact Tester Household Electrical Appliances Standard: IEC 60335-2-4 household and similar electrical appliances – safety: part 2-4: particular requirements for spin extractors, clause 21.101; IEC 60335-2-7 part 2-7: particular requirements for washing machines, clause 21.101. Application: The hemisphere rubber impact tester...

...Tester With 30r/min Crank speed Standard: IEC60335-2-2 ‘Household And Similar Electrical Appliances - Safety - Part 2-2: Particular Requirements For Vacuum Cleaners And Water-Suction Cleaning Appliances’ clause 21.102 figure 101. Application: Suitable for the Current-carrying hoses abrasion resistance tester...