iec 60884 1 compression testing apparatus

IEC 60884-1 Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending test and the pressure drop of the wire after the wire is connected to the non threaded terminal. Main technical parameters: Power supply AC220V 5A 50Hz Test

...figure 8 of IEC 60884- 1:2013, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N. The specimens are first placed in position a), as shown in figure 8 of IEC 60884-1, and the force is

IEC 60884-1 Figure 8 Arrangement for Compression Test of 24.5 / 300N Manual Compression Test Apparatus Product details: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the ...

... for compression test is designed according to IEC60884-1 clause 25.4 and figure 38, it is applied to verification the compression resistance performance in heating of cover of moveable socket-outlet, electrical accessories and surface type mounting box.

... socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show

IEC60884 Figure38 Apparatus for compression test for the verification of resistance to heat of 25.4 Product details: This apparatus confirms to the standard requirement of IEC60884-1 figure 38. It is used to test the pressure-resistant properties of the ...

... value: 5±1N Test time: 0-9999S Standard: Durability Marking shall be easily legible, durable and indelible. Laser marking directly on the product and marking made by moulding, pressing or engraving are not subjected to this test. Compliance is checked by

IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain Lateral Strain Test Apparatus Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated current...

Apparatus for Compression Test CP-1 Product details: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N. The ...