iec 60745 2 5 test probe

IEC 60745-2-5 Test Probe a for Circular Saw Guard Test, diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Test Finger Probe...

...IEC CSA & UL requirements Test Probe 13 of Short Test Pin - Fig. 9 of EN 61032 This Test Probe Pins (Figure 9 - Test probe 13 of IEC 61032) is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536). Conforms to: Standard IEC 61032, IEC 60065, IEC 60335-1, IEC 60950, IEC 60601, IEC 60745 and UL etc. Technical Parameter: Test probe diameter:3 mm Test probe...

....2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be

...inst to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be designed such that the test probe ‘a’ of figure 105, when inserted at any angle and to the