iec 60335 2 testing rotating spits

IEC 60335-2-9 Figure 102 Test Load for Testing Rotating Spits The testing rotating spits load complies with IEC60335-2-9 Figure 102, the equivalent mass is about 4.5kg, made of stainless steel. Size: Diameter 100 * 85 mm Key A Load, mass approximately 4,5 kg B Fixing screw C Axis of load D Axis of fixing screw NOTE: The load is positioned on the rotary spit so that the fixing screw contacts the diameter of the spit...

IEC 60335-2 Load Thickness 85+10 Mm Load For Testing Rotating Spits Product Information For Load For Testing Rotating Spits: The testing rotating spits load conforms to the standard of IEC 60335-2-9 clause 3.1.9.102 figure102, IEC60335-2-6 clause 3.1.9.104 figure 103, the equivalent mass is about 4.5kg. Technical Parameters For Load For Testing Rotating Spits...

...Test Equipment Load For Testing Rotating Spits Mass 4.5kg Standard of Load For Testing Rotating Spits: IEC 60335-2-6 Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances clause 3.1 .9.104 and Figure 103 – Load for testing rotating spits; IEC 60335...

... – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances clause 3.1.9.104 and Figure 103; IEC 60335-2-9 Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills,

IEC 60335 - 2 Power Cord Bending Tester With Electric Driving and PLC Control Overview: The equipment is according to GB4706.15,IEC 60335-2-23:11.101 A specially designed and manufactured device for hair care fitted with a rotating connection Test the bending resistance of the appliance's power cord. Test...

IEC60335-2-17 Figure BB.1 to BB.3 Equipment for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical ...

Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of IEC60335-2-14 clause 20.102 and GB4706 clause 20.102, it is applied to check if ...

...IEC Test Equipment Touch Screen PLC Control IEC Testing Equipment 60335 - 2 - 23 Swivel Flexing Tester Product information: The swivel flexing tester is designed and manufactured according to the standard IEC60335 -2- 23 clause 11.101, it is used to examine the temperature rise performance of the rotary joint of the apparatus after a continuous rotating operation. The test...