figure sb16 1 pull test device

...Figure SB16.1 Abrupt Pull Test Apparatus for testing plug Specifications: This apparatus is mainly used to perform the abrupt pull test of plug. This apparatus is designed and manufactured in accordance with UL 962A Figure SB16.1 / UL817 standard. Features: Model:KP-U62A6 Test station: 3 stations Abrupt pull weight:1.1kg* 3 Test times:0-9999 can be set Abrupt pull...

...Test Device for Vehicle Plug and Socket Complied Standards & Clauses Conforms to UL2594 clause 55.4, IEC62196-1:2014 clause 25.3 and figure 17 and table 11, IEC60309-1:2012 clause 23.3, etc. Product Overview It is used to test the ability of charging vehicle plug and socket, and connection cable accessories to withstand specified pulling force and torque. The pulling...

...similar general purposes- Part1:General requirements" clause 23.3 and figure 19. Test principle For Coupler Pulling Test Apparatus: Insert the connector into the device inlet corresponding to the type of connector to be tested and in accordance with the

...Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull...

...pull switches and knobs switches. It can also be used for load test when connected with the load box. This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and the normal