bump test machine with iec 60068 2 27

Bump Test Machine For IEC 60068-2-27 250m/S2 With Duration 6ms Product Introduction for Bump Test Machine Bump test machine is used for the laboratory simulation of the ability of the product to withstand collision damage in actual use, so as to assess the anti-collision ability of the product structure, and optimize the strength of the product structure through test...

Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment Technical parameters: Power supply: 220V / 50Hz. Lift stroke: 400-13500mm, manual operation, the impact specimen height is 200-850mm. Hammer: 2, 5, 10, 20 and 50J, stainless steel...

IEC 60068-2 Buttons Operation Type Salt Spray Corrosion Testing Machine Overview: Salt spray testing machine used to test the corrosive resistance of products whose the surface was treated with paint, electroplating, inorganic and organic film, anode ...

Electrodynamic Vibration Shaker System With MIL STD 810 and IEC/EN/AS 60068.2.27​ 1) Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency. 2) Two-magnetic circuit, magnetic flux leakage low, compact structure and rational...

... propelled road vehicles; ISO 16750-3 Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads; IEC 60068-2-27 Environmental testing – Part 2-27: Tests – Test Ea and guidance:

Half Sine Wave Mechanical Shock Test Bench Mechanical Acceleration Impact Tester With ASTM Standard Shock testing systems Design standards: GB/T2423-2008, GJB1217, GJB360.23, GJB150, GJB548, MIL-STD-202F, IEC-68-2-27, MIL-STD-883E, MIL-STD-810F, ISTA, UL ...