amine catalyst for polyurethane foams

... agent that serves to accelerate the reaction during the synthesis of polyurethane and its raw materials. The following is a comprehensive introduction regarding the PU catalyst NO. Application Prodution Grade No. Chemical Name Features 1 Flexible Foam &

Amine Catalyst for Lowdensity Microcellular Polyurethane Foams CAS 280-57-9 EX-102 1. General Description AMINE CATALYST EX-102 is an amine catalyst diluted in mono-ethylene glycol and is used in lowdensity microcellular polyurethane foams to significantly improve the foam flowability. 2. Main Features and Advantages Improved flowability in low density microcellular polyurethane foams Good foam...

AMIN A-33 (TEDA -A33) Polyurethane Additives AMIN A-33 (TEDA -A33) for the foam production Application It has good catalytic effect on the reaction of isocyanate with water and the reaction of isocyanate with polyols. It is mainly used in flexible foam, rigid foam, polyurethane sole and polyurethane molding foaming...

... and other industries. This polyurethane additive can effectively reduce the hardness, and improve the softness and tear strength of the sponge. 1. Improve the softness of the sponge products. 2. Increase the special ...

...mixing speed. Increase the width of the conveyor to make a wider block more than 2070, maximum up to 2500mm. Extra polyol, TDI, catalyst metering unit. Calcium carbonate or melamine feeder system. Pigment system, traditional or milliken reactant system.

... agent, catalyst, foaming agent in accordance with a certain ratio of mixing, the need for related equipment constant temperature and constant pressure molding next thermosetting waterproof ...