50 mhz agilent n1921a power sensor

...Agilent N1921A P-Series Wideband Power Sensor Description of Keysight Agilent N1921A P-Series Wideband Power Sensor The N192XA sensors are the first to provide internal zero and calibration, by integrating a DC reference source and switching circuits into the power sensor...

The pre-owned Agilent 8481A extends average-power measurements from 10 MHz to 18 GHz with a wide –30 dBm to +20 dBm span and sub-1 % linearity, so a single sensor covers everything from VHF radios to Ku-band mixers without range-switch glitches. Its ...

...Sensor High Speed Video Data Tate 50 MHz The S11105 series is a CMOs linear image sensor that delivers a video data rate of 50 MHz. Two package styles are provided: a DIp type and a surface mount type. Features Video data rate: 50 MHz max Pixel size: 12.5 x 250 ym 512 pixels Simultaneous charge integration for all pixels Variable integration time function (electronic shutter function) Single 5 V power...

...RF Test Equipment Peak And Average Power Sensor, 50 MHz To 18 GHz Product Attribute Attribute Value Manufacturer: Keysight Product Category: RF Test Equipment RoHS: Details Equipment Type: RF Power Meter Frequency Range: 50 MHz to 18 GHz Brand: Keysight ...

...power 3-axis digital output Magnetoresistive Sensor Product Description Of IIS2MDCTR The IIS2MDCTR is a high-accuracy, ultra-low-power 3-axis digital magnetic sensor.The IIS2MDCTR has a magnetic field dynamic range up to ±50 gauss.The IIS2MDCTR includes an I2C serial bus interface that supports standard, fast mode, fast mode plus, and high-speed (100 kHz, 400 kHz,1 MHz, and 3.4 MHz...

... Working Model ON/OFF Power of Load Max.100W Current of Load N/A Surge Current of Load 　 Sensor Parameters Operating Frequency 5.8 GHz ±75 MHz Transmitting power <0.3mW Max. Hold time 5s/60s/3min/10min Dim down N/A Stand-by N/A Sensitivity 50%/100%

...QFN package 5.0 x 3.0 x 1.0 mm3 - Supply voltage 1.8 to 3.6 V - Integrated digital pressure sensor (24 bit ΔΣ ADC) - Operating range: 10 to 1200 mbar, -40 to +85 °C - I 2C and SPI interface up to 20 MHz - No external components (Internal oscillator) -

...50 mV/µW at 915 MHz • Low Flicker Noise: -162 dBV/Hz at 100 Hz • Low FIT (Failure in Time) Rate* • Tape and Reel Options Available • Matched Diodes for Consistent Performance • Better Thermal Conductivity for Higher Power Dissipation • Lead-free Option Available Description Agilent’s HSMS...

...50 mV/µW at 915 MHz • Low Flicker Noise: -162 dBV/Hz at 100 Hz • Low FIT (Failure in Time) Rate* • Tape and Reel Options Available • Matched Diodes for Consistent Performance • Better Thermal Conductivity for Higher Power Dissipation • Lead-free Option Available Description Agilent’s HSMS...