2 7kg iec 61850 testing

...Test Set with IEC 61850 Testing Model: RELAYSTAR-Z70 The Handheld Protection Relay Test Set RELAYSTAR-Z70 is designed for both conventional substation and digital substation commissioning testing and maintenance. It can output 3-phase current(3x0…10A) and 3-phase voltage(3x0…120V) for testing...

... testing needs of relays. It not only meets the performance verification of traditional electromechanical relays, but also can be adapted to high-voltage DC relay testing in scenarios such as smart grids and electric vehicle charging piles. Through the

...IEC 61850 Relay Testing Kit Sv Goose Simulator Discription of High Precision Relay Testing KF85 Universal protection relay test function, With fully function of Manual test, state sequencer, Harmonic, recloser test , Line differential, Distance, Mutation distance, Overcurrent, Zero sequencer, Ramping, Power direction, Differential rate, Differential Harmonic, Overexcitation protection, Synchronize, Reserve power supply test...

... 3) With an open protocol, SMV and GOOSE messages support flexible configuration and get seamless integration with any manufacturer's products 4) Digital output based on IEC 61850 5) Can also output 0-5V small-analog signal 6) Supports hard ware input and

... to the international IEC61850 and national standard DL/T860 technical requirements. IEC 61850 Testing Software uses friendly interactive graphical interface, easy to operate. Users need to grasp the concept of a few IEC61850, then can use well of

IEC 60065:2014 clause 12.1.5 single arm drop tester Standard: Conforms to IEC 60065:2014 clause 12.1.5, 15.4.3 a), 12.7.3.4, IEC 60950-1 Clause 4.2.6, IEC 60598-1 Clause 4.13.4b) Application: This device is suitable for verify the drop resistance performance of audio, video and similar electronic apparatus having a mass of 7kg or less, information technology equipment having a mass of 5 kg or less, and portable lamp . Test...

IEC 60065 Clause 12.1.1 Drop Testing Equipment for Audio Video Products Brief Introduction: This drop test device meets the requirements of IEC 60065 Clause 12.1.1 and etc. It is suitable for repeated drop strength testing of various audio and video products with the weight over 7kg. The test times can be set in advance, and it will automatically stop when the test times reache the set value. It is easy for operators to handle. Place the test

...Test Device SH-14 Standard: IEC 60950-1 Clause 4.2.6, IEC 60598-1 Clause 4.13.4b), IEC 60065 Clause 12.1.14, IS 616-2010 Application: This device is suitable for verify the drop resistance performance of audio, video and similar electronic apparatus having a mass of 7kg or less, information technology equipment having a mass of 5 kg or less, and portable lamp . Test...

IK08 5J 1.7kg impact test machine,pendulum impact test machine IEC60068-2-75 Environmental testing – Part 2: Tests – Test Eh: Hammer tests, IEC60068-2-63, IEC62262 Degrees of protection provided by enclosures for electrical equipment against external ...

...testing. Power banks: Power banks with a DC output not exceeding 6V and a weight not exceeding 7kg must apply for TISI certification before they can be exported to Thailand, and samples must be sent to local testing. Rechargeable lithium battery You can use IEC 62133:2017 or IEC...

... standards: IEC 61010-1, 61010-2-030 Pollution degree 2, IEC 61010-031, IEC 61326-1, 2-2 Power source: DC12V : LR14/R14 × 8pcs Dimensions: 177 (L) × 226 (W) × 100 (D) mm Weight : 1.7kg approx. Accessories: 7165A (Line probe: 3m) 7264 (Earth cord: 3m)