0 01 cm 1 cell constant conductivity sensor

Yokogawa supplies superior on-line analyzers for monitoring and controlling the conductivity of liquids and solutions. Now, Yokogawa provides the SC450G four-wire conductivity/resistivity converter, the SC202G and SC202S two-wire conductivity/resistivity ...

...Cell Dedicated Conductivity Sensor for Coolant Monitoring Measuring Range 0.01~20uS/cm Accuracy +/-1.5%FS CAN Communication IP67 Protection Quick Detail: Conductivity sensor developed specifically for the coolant circuit of proton exchange membrane fuel cells (PEMFC) Core function: real-time monitoring of coolant conductivity...

... Temperature Range: 0~150℃ Pressure Rating: 0~2.0MPa Temperature Sensor: PT1000 Installation Interface: Upper NPT3/4, down NPT1/2 Electrode Cable: Standard 10m >>Principle Since water contains various dissolved ...

... liquids​ such as RO/DI permeate, boiler condensate, and pharmaceutical‑grade water. Its cell constant K=0.01 cm⁻¹​ covers 0.055–100 µS/cm​ (resistivity 18.2 MΩ–10 kΩ, ≈0.02–50 ppm TDS) with ±2% of reading​ accuracy. The

...Conductivity Sensor Condumax CLS21 Measuring Range; Cell Constant: C 0,01-20,0mS/cm; (K=1) Process Connection: 1E Thread G 1"; PES Cable Connection: 4 Plug DIN 4-pole, PG9 Temperature Sensor: A Pt100 Specs at a glance Measurement range k=1: 10,0 µS/cm - 20,0 mS/cm Process temperature max. 135°C (max. 275°F) Process pressure max. 16 bar at 20°С (max. 232psi at 68°F) Field of application Condumax CLS21 is a robust conductivity

... conductivity sensors Measuring range k=0,01: 0.04 to 20 µS/cm k=0,1: 0.10 to 200 µS/cm Measuring principle Conductive conductivity cell with polished stainless steel electrodes Design 2-electrode conductivity cell with coaxially arranged ...

...conductivity sensor Indumax conductivity sensor Description: Manufacturer : Endress+Hauser Product No. : CLS50-G6C1 Product type : Indumax CLS50Inductive Conductivity Sensor Version : G = For use in hazardous areas, ATEX II 1G Ex ia IIC T4/T6 Ga Measuring ranges : Conductivity = 2 µS/cm to 2000 mS/cm (uncompensated), Temperature = -20 to +180 °C (-4 to +350 °F) Cell constant : k = 1.98 cm...

Equipment Description: I. Control system 1. DC power supply Parameters: 50-300V adjustable, ripple factor <5% (silicon rectifier/thyristor technology). Mode: constant voltage/constant current switching to meet the coating requirements of different ...