figure 102 specified foot probe test

IEC 60335-2-107 Figure 102 Foot probe test

Figure 102 Test Finger Probe For Testing Cooling System Components Figure 102 Test Finger Probe For Testing Cooling System Components Product Details Standard:Conforms to IEC60335-2-24 Clause 22.107.2 figure 102. Application:The scratch pin probe use to do the scratch test with home appliances whose accessible surface of protected cooling system components, including accessible surface in intimate contact with protected cooling system. Test

IEC60335-2-24 Figure 102 Scratching Tool Tip Product information: The scratching tool tip is for home appliances whose accessible element surface of all protected cooling system, including the c accessible element surface that have close contact with a ...

...Foot Probe For Robotic Battery Powered Electrical Lawnmowers Product Information For Foot Probe: Samples and restrictions Smart lawn mower powered by battery Application Use it to simulate the protection of battery-powered smart lawn mowers to verify the shell protection capabilities of the smart lawn mower and ensure its safety performance Test principle Made according to standard size of figure...

IEC60335-2-80 Figure 102 Test Pin for Testing the Fan 1. Introduction The test pin is completed designed according to IEC60335-2-80 figure 102, it is to simulate the bolt of fan. The pin is fully inserted so that it connects the down rod to the motor. The ...

...inst to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be designed such that the test probe ‘a’ of figure 105, when inserted at any angle and to the