en61643 11 class c surge protection device

RJ45 Network Surge Lightning Protector 10KA Signal Lightning ProtectorPackaging & Delivery Signal lightning arrester is a professional lightning protection equipment for network, communication, optical cable, radio, TV, monitoring, video and other signal ...

... oxide vristor components with high discharge capacity. • Supplied with replaceable cartridges and operational indicator. • Remote signaling contact for control device: optional. • SPD Type 2 & Class C according to EN 61643-11 & IEC 61643-1 for the

... according to IEC 61643-11 Class III Nominal a.c. voltage Un 230V Max. continuous operating a.c. voltage Uc 275V Max. continuous operating d.c. voltage Uc 300V Nominal discharge current (8/20us) In 3kA Combined impulse Uoc 6kV Voltage protection level Up

... according to IEC 61643-11 Class III Nominal a.c. voltage Un 230V Max. continuous operating a.c. voltage Uc 275V Max. continuous operating d.c. voltage Uc 300V Nominal discharge current (8/20us) In 3kA Combined impulse Uoc 6kV Voltage protection level Up

More Reliable Single phase type 1 100ka surge protector for sale TSTLP series 100kA surge protector designed according to IEC 61643-11 is for installation at LPZ 0A -1 or higher, protecting low voltage equipment against lightning and surge damages. Applied...

... and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from

...surge protector active lightning arrester Technical Data: The active lightning arrester OBV5-B60 meet the type 1+2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection...