clause v 1 2 jointed test probe

... clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the

..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of

...f IEC60601-1, IEC61032/GB/T 16842, Appendix V.1.2 and Figure V.2 of IEC62368-1, clause 8.1 of IEC60335-1, IEC60529, clause 8.2.5 of IEC60598-1, clause 10.1 and clause 16.2.2.2 of IEC60884-1, and clause 3.8.1 of AS/NZS 3112, and is used for inspection of

...Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Conform to the IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and ...