clause 25 15 cord anchorage pull force tester

...the standard requirements of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps)

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to

... 1: General requirements clause 25.15; IEC 60884-1 Plugs and socket-outlets for household and similar purposes – Part 1: General requirements clause 23.2; Application of Cord Anchorage Torque Testing Equipment: Appliances provided with a supply cord, and

... standards. It is use to perform tension and torque test on the power cord. It is used to test the strength of connections. Accordding to the standard IEC 60335-1 Clause 25.15 --“Appliances provided with a supply cord, and appliances intended to be

... and Table 114. Product overview Samples and restrictions: Electric vehicle AC and DC charging station Test purpose: The flexible cord anchorage of the appliance shall relieve conductors at the terminals from pulling force and torque. This

Cord Anchorage For Supply Cord Household Appliance Test Equipment Standard: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 25.15 Application: It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Appliances provided with a supply cord...

...: It is used to check the cord anchorage of the appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall relieve conductors from strain, including twisting, at the terminals and

..., IEC60065:16.5, IEC60598:5.2.11, etc. It is used to evaluate the power cord and is intended to be permanently connected with flexible cord. The power cords such as household appliances and medical equipment such as fixed-wired appliances are subjected to