3 meter cube smoke density tester

...measurement of the smoke density of cables or optical cables. The system is in accordance with the new GB/T17651 and IEC61034 standards. The measuring principle of this test instrument is Lambert-Beer law. The smoke density is expressed by measuring the

IEC61034 BS6853 27 Cube Meter Cable Smoke Density Tester Introduction: The IEC Cable Smoke Density Tester is used for measuring the emission when the cable or optical cable is placed horizontally under the definite fire condition. The equipment comprises...

...Meter Cube Smoke Density Test Chamber Introduction 27 Metre Cube Smoke Density Apparatus is used for measuring the emission when the cable or optical cable is placed horizontally under the definite fire condition. The equipment comprises a cubic enclosure and a photometric system. The specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned. Standards: IEC 61034 - 1 & 2 Measurement of Smoke

...Smoke Density Tester Part 1 Three Cube Meter 3m3 Cable Introduction: 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the value of light source penetration through the smoke

...Smoke Density Tester For Fiber Optic Cable Introduction: IEC61034, BS6853, EN 50268 Cable Smoke Density Tester is used to test cable or fiber optic cable under the specified burning conditions, horizontal, observe the smoke generation under flaming combustion. (IEC61034 requires cigarette box size of 3m3 cube). IEC61034 3 IEC61034, BS6853, EN 50268 Cable Smoke Density Tester plays an important role on gas smoke

... according to the technical conditions stipulated in the standard GB/8323.2-2008 and ISO 5659-2 "Test methods for the determination of smoke density using the single chamber method for the production of plastic cigarettes". The test equipment is

...Cube (Wire and Cable) Smoke Density Tester Product description: 3M cube smoke density tester is used for measurement of smoke density of cables burning under defined conditions Test index: Optical density (OD) and specific optical density (DS) of the smoke Measuring principle: Lambert-beer Law Measuring method: Measure the smoke light transmission percent of original light transmission to represent smoke density...

... 1. Blower for gas supply of radiant plate can supply gas continuously, while air compressor supply gas uncontinuously. 2. Heat Flux meter, portable water cooling system without running water supply. 3. Ventilation hood of