5000N Pull Test Machine , Liyi AC220V Tensile Strength Testing Machine
|
... pull and pressure testing machine cann test numerous materials, including semi-finished and finished products. It is widely adapted for metal, yarn, textiles, leather, plastic, rubber, cable, fabric and other industries push and pull testing. And the...
Dongguan Liyi Environmental Technology Co., Ltd.
|
UL817 Tensile Strength Testing Machine Abrupt Removals Test Apparatus
|
...Tensile Strength Testing Machine Abrupt Removals Test Apparatus Product overview: This device complies with UL817 standard which is applicable in the assessment of the connection intensity between the molded power plug and guide line, and the guide wire’s anti- sudden tensile strength ability. The test equipment is applicable to abrupt pull test (UL 817 clause 99.1~99.2), jacket retention test (UL 817 clause 100.1~100.3), flexing test......
Guangzhou HongCe Equipment Co., Ltd.
|
Mitsubishi Servo 2000KG Tensile Strength Testing Machine
|
...test, bending test, compession test,peel test, tearing test,elongation test,Material Universial Testing Equipment for tensile strength, compression test, tearing test,bending test etc This UTM machine can do various strength testing in the field of rubber,...
Dongguan Hust Tony Instruments Co.,Ltd.
|
Electrical Power Cords Pull Test Machine , Torque Testing Machine IEC60320
|
...Pulling Force And Torque Testing Machine Product Description: This instrument is based on the GB2099.1, GB4706 and IEC60320 standards, used to test the tensile and torsion tests of various types of electrical power cords, and to assess whether the power cord clamping device is firm. Instrument parameters: 1) Station: 1 2) Pull......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Single Column Fabric Leather Materials Tensile Strength Testing Machine
|
...Tensile Strength Testing Machine 1. Fabrics Material Tensile/Tearing Strength Testing Equipment/Machine Usage: Tensile test, tearing test and so on. Standards: Most internation standards including ISO, ASTM and so on. Application: Fabrics Materials 2. Technical Parameter(accept customization) Load range Maximum of 300kg Unit exchange kgf,lbf,N Accuracy of load ± 1% Load resolution 1/10,000 Max. tensile......
Dongguan Gaoxin Testing Equipment Co., Ltd.,
|
Computer System Universal Testing Machine , Tensile Strength Testing Machine
|
Computer system universal testing machine/equipment with the extend device(GW-011A1) •Brief introduction: This machine is used to test tension, compression, bend, shearing force, adhesion, peeling force, tear strength, etc. Of specimen, semi product and ......
Dongguan Guo Feng Testing Machine Co., Ltd.
|
5KN Power Cord Tester Vertical Single Column Digital Tensile Strength Test Machine
|
... tape, rubber, resin, plastic, metal rod, metal pipe, metal sheet and metal profile, and composite material. It is also suitable for the tensile test of finished products when matched with fixtures., Compression, peeling, shearing, bending (folding),...
Chenxin Automation Equipment(Guangzhou) Co., Ltd.
|
48 Fiber MPO MTP Trunk Cable with 1500 N Tensile Strength and Pulling Eye for Long Duct Pulls
|
...pull load goes somewhere other than the fiber and the ferrule. This 48-fiber assembly solves that with two features working together: aramid yarn laid the full length as the strength member, and a factory-fitted pulling eye that grips the yarn rather than the connector body. The rated tensile......
KOCENT OPTEC LIMITED
|
Polymer Asphalt Waterproof Rolls 400W UTM Universal Testing Machine
|
...Testing Machine Tensile Property Tear Property Testing Machine Product Description Used in tensile property test for building waterproof rolls, asphalt waterproof rolls, polymer modified asphalt waterproof rolls, polymer waterproof rolls, elastic modified asphalt waterproof rolls, etc. Tensile property, tear property, max. peak, joint peel strength, joint tear strength, tensile strenth, tensile......
Sichuan Shine RC Medical Technology Co. ,ltd
|
ISO30 Pull Stud Retention Knob For CNC Tool Holder Replacement Parts
|
... a worn pull stud on an ISO30 tool holder without buying a new holder? This retention knob threads into the tail of the ISO30 holder and is gripped by the spindle drawbar, so the holder is pulled onto the taper and stays there. It is machined from high......
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
|
