GE FANUC IC697MDL651 ， 32-Point Discrete Input Module ， Series 90-70 Programmable Controllers
|
...Programmable Controllers. It features 32 TTL compatible input points with each input having a pullup resistor. Thus, user power is not required. The input filter selectable is 1ms or 10ms and one input is configurable as interrupt. There are LED indicators...
Shenzhen Wisdomlong Technology CO.,LTD
|
74HC Aviation Parts MC74HC14ADR2G Inverters Supply Voltage Max 6V
|
...the LS14, LS04 and the HC04. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The HC14A is useful to “square up” slow input rise and fall times. Due to hysteresis voltage of ......
XIXIAN FORWARD TECHNOLOGY LTD
|
TCA9509DGKR Electronic Component 2.7V-5.5V 400kHz I2C Interface IC Chip
|
... on B side • Operating voltage range of 0.9 V to 5.5 V on A side • Voltage-level translation from 0.9 V to 5.5 V and 2.7 V to 5.5 V • Active-high repeater-enable input • Requires no external pullup resistors on lower-voltage port-A • Open-drain...
Shenzhen Retechip Electronics Co., Ltd
|
Programmable IC Chip SMJ27C256-15JM - Austin Semiconductor, Inc. - UV Erasable Programmable Read-Only Memory
|
... with MOS and bipolar circuits. All inputs (including program data inputs) can be driven by Series 54 TTL circuits without the use of external pullup resistors....
Mega Source Elec.Limited
|
Electronic Components Inverter Schmitt Trigger 6-Element CMOS Automotive TSSOP W T/R MC74HC14ADTR2G Integrated Circuits
|
...the HC04. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The HC14A is useful to “square up” slow input rise and fall times. Due to hysteresis voltage of the Schmitt trigger,...
Shenzhen Weitaixu Capacitor Co.,Ltd
|
TCA9406DCUR Voltage Level Translator Bidirectional 1 Circuit 2 Channel 24Mbps 8-VSSOP
|
...SCL_B, SDA_B Pins When OE = Low or VCC = 0 V • Internal 10-kΩ Pullup Resistor on All SDA and SCL Pins • 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB) • VCC Isolation Feature: If Either VCC Input Is at GND, Both Ports Are ......
ChongMing Group (HK) Int'l Co., Ltd
|
Submit your “pullup resistor” inquiry in a minute :