Low Mould Temperature Polyol And Isocyanate MT System For HR Foam
|
...low mould temperature for HR foam JYST－31A/B Introduction: JYST-31A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite catalyst. JYHR-11B is made up of TDI and modified MDI. This type of blend polyol can be used under the temperature......
JOYWAY INDUSTRIAL COMPANY LIMITED
|
Polyurethane PU Foam Blend Polyol / MDI Isocyanate Raw Material CAS No. 9003-11-6
|
...as follows, 1) Fine and uniformity cells 2) Low thermal conductivity 3) Perfect flame resistance 4) Good low temperature dimensional stability. It applies to all kinds of thermal insulation engineering which uses the spray technology, such as cold rooms,...
Vida New Material Technology Co., Ltd.
|
Cushioning Effect Making Boxing Gloves Polyether Polyol
|
... agent, catalyst and so on, Part B is isocyanate MDI. This system enjoys good liquidity, excellent mechanical property,and good cushioning effect. 3. SPECIFICATION Item A/B Ratio(Polyol/Iso) 100/65-100/75 Mould Temperature ℃ 40-45 Demolding Time min 4-6...
Qingdao Exceed Fine Chemicals Co.,Ltd
|
Pbw Polyurethane Chemical Package Combined Materials Isocyanate And Polyol Foam Raw Material
|
... conductivity 3) perfect flame resistance 4) good low temperature dimentional stability. It applies to all kinds of thermal insulation engineering which uses the spray technology, such as cold rooms, pots, large-scale ......
Shandong Hightop Group
|
Rapid Plastic Prototyping Rim Molding For Automotive Parts
|
... and polyol as they are injected into a closed mould at low pressure. The two components are mixed together as they flow into the mould as a low-viscosity liquid and the reaction, which increases the temperature and the pressure at the surface of the tool,...
Shenzhen Xianheng Technology Co.,Ltd
|
Submit your “low mould temperature polyol and isocyanate” inquiry in a minute :