Home > Electrical Equipment & Supplies > Industrial Controls > PLC PAC And Dedicated Controllers >

Iec60695 2 20 Flammability Testing Equipment

1-10 Results for

iec60695 2 20 flammability testing equipment

from 30 Products

IEC60695-2-10 Flammability Testing Equipment PLC Control

IEC60695-2-10 Flammability Testing Equipment - Glow Wire Tester PLC Control Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC60695-2-10 Flammability Testing Equipment

...Flammability Testing Equipment For IEC60695-2-10 With 4mm Glow-Wire And Button Operation Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

500 W flames tester , IEC60695-11-3 Flammability Testing Equipment

...IEC60695-11-3 Flammability Testing Equipment Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC60695-11-5 Flammability Test Equipment PLC Type Needle Flame Tester

PLC Type Needle Flame Tester IEC60695-11-5 Flammability Test Equipment 1. Introduction The needle flame test apparatus is controlled by 7-inch color touch screen and PLC, the system comes with a flame calibration system. The shell is made of painted ......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Vertical Horizontal Flammability Tester , IEC60695-11-20 Flammability Test Apparatus

Horizontal and Vertical Burning Tester flammability test apparatus Main Functions: .The machine can record the burn time and finish experiment automatically, .It can open and close the exhaust system automatically, .Both FT and VW test can be performed by ......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

UL94 Flammability Test Equipment With 50W 500W Double Power Switching

...-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. It simulates the influence of early-stage flame when...

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

UL94 Horizontal Vertical Flame Chamber with power 50W 500W Flammability Test Equipment

...-11-4. Application:It is required by IEC 62368-1:2018 Annex S, IEC 60950:2013 clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It simulates the influence of early-stage flame when there is a fire around the...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

UL94 Flammability Testing Equipment , Horizontal Vertical Flammability Tester

...Test Apparatus Standard:UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application:It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. It is mainly used in plastic and other non-metallic material sample, solid material. It is also applicable in the Horizontal, vertical flammability...

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Touch Screen Flammability Testing Equipment / Needle Flame Tester IEC60695-11-5 IEC60695-2-2

... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The...

DONGGUAN YUYANG INSTRUMENT CO., LTD

Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China

IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus

IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test......

Guangzhou Kinte Electric Industrial Co.,Ltd

Address: No.16 Yufeng Road, Shiling Town, Huadu District, Guangzhou City, Guangdong Province

Submit your “iec60695 2 20 flammability testing equipment” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Guangzhou Kinte Electric Industrial Co.,Ltd Products: IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec60695 2 20 flammability testing equipment” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0