Home > Electrical Equipment & Supplies > Electrical Instruments > Battery Testers >

Iec Test Equipment For Terminals

1-10 Results for

iec test equipment for terminals

from 339 Products

IEC Test Equipment For Conductor Damage Degree Testing With Guide Rail Structure And Multiple Test Stations

..., IEC60669-1, UL486A-B Application with IEC Test Equipment: Our innovative device is designed to evaluate the resilience of both threaded and non-threaded terminals when subjected to mechanical forces typical of everyday operations. Its primary function is...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC 60069-1 IEC Test Equipment Conductor Damage Degree Test Apparatus Rate 10 ± 2 R/Min

...Test Apparatus IEC 60069-1 Test Equipment Rate 10 ± 2 r/min Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 12.2.5, figure 11 IEC 60669-1 ‘Switches for household and similar fixed electrical installations – Part 1: General requirements’ clause 12.2.5, figure 9 Standard description: Terminals......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

AC220V 50Hz IEC Test Equipment For Checking Wire Conductors Damage

... test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is...

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

AC40-50V IEC Test Equipment , Electrical Safety Testing Equipment

... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potential is connected with the input terminal of the...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC61058 Load Box IEC Test Equipment

...equipment testing IEC test equipment Product overview: This load box is designed and manufactured according to IEC60884, IEC61058, IEC606691 standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Test Finger Probe,precision iec test equipment,jointed iec test finger probe

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....

ALLIED TESTING (HK) CO.,LTD.

Address: Unit 04,7/F,Bright Way Tower,No,33 Mong Kok Road Kowloon,HK.

IP1X / IP2X Iec Test Equipment , Test Sphere Diameter 50 Mm With Handle

Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 62196-1 Electric Vehicle Terminal Test Equipment For Mechanical Tests On Terminals

...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 62196-1 Screw Terminal Clamping Test Machine for EV Connector Reliability

IEC 62196-1 Screw Terminal Clamping Test Machine for EV Connector Reliability Complied Standards & Clauses This testing machine conforms to IEC 62196-1:2022 clause 13.3.1 fig12, table 3. Equipment Overview This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

6 Groups Cable Testing Equipment For Plug Static Pull Test , UL / IEC Standard

...Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1.Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2.Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal......

Dongguan Gaoxin Testing Equipment Co., Ltd.，

Address: No.7, Shengfeng Road 523039, Xinhe Industrial Park, Wanjiang, Dongguan, Guangdong, China

Submit your “iec test equipment for terminals” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Dongguan Gaoxin Testing Equipment Co., Ltd.， Products: 6 Groups Cable Testing Equipment For Plug Static Pull Test , UL / IEC Standard
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec test equipment for terminals” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0