EV Charging Connector Withdrawal Force Test Apparatus IEC 62196-1
|
... This EV Charging Gun Withdrawal Force Test Apparatus is designed in compliance with IEC 62196-1:2022 clause 16.16. It accurately measures the maximum force required to insert the charging gun into the socket, ensuring the charging interface is easy to...
Sinuo Testing Equipment Co. , Limited
|
IEC 62196-1 Withdrawal Force Test Apparatus EV Charging Gun Insertion Force Tester
|
...h IEC 62196-1:2022 clause 16.16. This testing equipment is widely used for EV charging interfaces, charging guns, sockets, and connectors, ensuring that the insertion force of AC and DC charging guns meets international standards. It provides a reliable,...
Sinuo Testing Equipment Co. , Limited
|
IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm
|
IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm 1. Introduction of apparatus for checking damage to VE conductors: The apparatus for checking damage to EV conductors is designed to meet the test requirements of IEC62196-1 clause 13.3 figure 12, IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause 6.9.7.3 (for flexion test). The apparatus......
Pego Electronics (Yi Chun) Company Limited
|
IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...
KingPo Technology Development Limited
|
IEC 60598-2-8 Light Testing Equipment Crush Test Apparatus For Handlamps 100N Force
|
... of IEC 60598-2-8 clause 8.16.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp which are gripped in normal use are subjected to a...
Guangzhou HongCe Equipment Co., Ltd.
|
Manual 300N Compression Test Apparatus Plug Socket Test Equipment
|
....1, 24.5 and figure 8 Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60884 Fig18 Withdrawal Force Verification Apparatus
|
Apparatus For Verification Of Max Withdrawal Force IEC60884 Fig18 19 Application: It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum ......
Guangzhou Shice Equipment Co., Ltd.
|
Socket-outlets Protection Accessibility Probe Test Pin with 20N Force of IEC60884
|
... of necessary protection of against electric shock test apparatus; Gauge for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection. Technical Parameters: Gauge: 3mm*......
HK LEE HING INDUSTRY CO., LIMITED
|
Automatic IEC 60884-1:2022 Clause 8.8 Figure 5 Apparatus For Durability Of Marking
|
... value: 5±1N Test time: 0-9999S Standard: Durability Marking shall be easily legible, durable and indelible. Laser marking directly on the product and marking made by moulding, pressing or engraving are not subjected to this test. Compliance is checked by...
Dongguan Kingpo Technology Limited
|
300N Compression Testing Machine CP-1 IEC 60884-1 By Manual Operating
|
Apparatus for Compression Test CP-1 Product details: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N. The ......
shanghai kerang technology co ltd
|
Submit your “iec 62196 1 force test apparatus” inquiry in a minute :