IEC 61032 Child Test Finger Probe for Protection Against Hazardous Parts with Human Finger
|
... ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out...
ALLIED TESTING (HK) CO.,LTD.
|
IEC 61032 Accessibility Test Probe with 75n Force,IEC61032 Rigid Test Probe
|
...Test Finger Probe of IRAM 4220-1 / IEC 61032 / IEC 60335 Rigid Test Finger Probe is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. Rigid Test Finger......
HK LEE HING INDUSTRY CO., LIMITED
|
EN 60529 IEC 60529 IP1X Test Finger Probe Sphere Diameter 50mm
|
EN 60529 IEC 60529 IP1X Test Finger Probe Sphere Diameter 50mm IEC60529 IP1X 50mm Sphere Test Probe This IEC 60529 IP1X 50mm Sphere Test Probe is also in accordance with IEC 61032 Figure 1. It is intended to verify the basic protectiion against access to ......
Dongguan Kingpo Technology Limited
|
Iec 61032 Test Ul Finger Probe 11 For Unjointed Test Finger
|
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing......
SKYLINE INSTRUMENTS CO.,LTD
|
IEC 60335-1 Test Finger Probe For Test Nails The Maximum Applied Pressure 30N
|
IEC 60335-1 Test Finger Probe For Test Nails The maximum applied pressure is 30N Product description of Test Finger Probe: 1. The test nails are made according to GB4706.1-2005, IEC60335-1 and UL standards. 2. The test nail is mainly used to test whether ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 62196 Jointed Test Finger EV Connector Testing Equipment
|
IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger......
Sinuo Testing Equipment Co. , Limited
|
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance
|
IEC 60529 Jointed test finger 12mm, IP2X Material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 bot......
KingPo Technology Development Limited
|
IEC 61032 Test Finger Probe 12mm Diameter & Dual Joint Design
|
IEC 61032 Test Finger Probe 12mm Diameter & Dual Joint Design Product Description The HT-I19 Test Finger Probe is a precision safety testing tool engineered to simulate human finger contact for evaluating electrical equipment safety. Compliant with the IEC 61032 standard, this B-type test finger features a dual-joint design that mimics natural finger......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6
|
IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe diameter (mm) Ф8.6±0.1 Finger...
Guangzhou Shice Equipment Co., Ltd.
|
Submit your “iec 61032 compliant iec test finger” inquiry in a minute :