Apparatus For Testing Resistance To Abnormal Heat Of Insulating Sleeves Of Plug Pins , IEC 60884-1 Test Equipment
|
... sleeves of plug pins , IEC 60884-1 test equipment 1. Product information: To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40,This test apparatus consists of an insulating plate A...
KingPo Technology Development Limited
|
IEC 60884 Temperature Test Equipment TR-1 For Electronic Accessories Rising
|
...IEC 60884 – 2006 (Figure 44), VDE0620 etc. It is applicable to the temperature rising of electronic accessories in working position. Technical parameters: Item Name TR-1 TR-2 TR-3 Working station 6 6 6 Testing current 0-40A 0-125A 50-1000A is adjustable Testing......
shanghai kerang technology co ltd
|
IEC 60884 Structure Reliability Testing Equipment For Socket Outlets
|
IEC 60884 Structure Reliability Testing Equipment For Socket Outlets IEC 60884-1 Clause 24.3 Structure Reliability Tester FOR Surface Type socket-outlets Cylindrical Steel Plate Socket Fixed Structure Reliability Tester IEC 60884.1 Clause 24.3 Product information: The cylindrical steel plate is designed and manufactured according to IEC60884-1 clause 24.3, GB2099.1-2008 clause 24.3 and etc., it is used to check the reliability......
Dongguan Kingpo Technology Limited
|
IEC 60884.1 Test Device To Verify The Fixation Of Pins In The Body Of The Plug Single Station Plug Pin
|
IEC 60884.1 Test Device To Verify The Fixation Of Pins In The Body Of The Plug Single Station Plug Pin Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.10, Figure 30 Standard ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test...
Sinuo Testing Equipment Co. , Limited
|
IEC 60669-1 Test Equipment Self Ballasted Lamp Bulb Load Box Three Test Stations
|
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment
|
IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment Complied Standards & Clauses This IPX1~8 waterproof test system conforms to IEC 60529:2013, etc. Equipment Overview This test device is to verify Protection against Vertically Falling ......
Sinuo Testing Equipment Co. , Limited
|
Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable
|
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC 60754 Wire Testing Equipment , Cable Halogen PH And Conductivity Testing Equipment
|
... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60331 Burning Testing Equipment For Electric / Optical Fibre Cables Circuit Integrity
|
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ......
Dongguan Hust Tony Instruments Co.,Ltd.
|
