Home > Tools & Hardware > Hand Tools > Tape Measures >

Iec 60730 1 Figure 8 Markings Durability Tester

1-10 Results for

iec 60730 1 figure 8 markings durability tester

from 3 Products

IEC 60730 Standard 20mm Stroke Marking Durability Tester

IEC 60730 Standard 20mm Stroke Marking Durability Tester Standard Compliance The apparatus adheres to the standards set in IEC 60730 - 1:2015, specifically the General requirements clause 7.4 and Annex A, Figure 8. This standardization ensures the reliability and comparability of test results obtained using this equipment. Application Purpose The primary application of this testing apparatus is to evaluate the indelibility of markings......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Apparatus For Testing Durability Of Markings On Rating Labels , IEC 60730-1-Figure 8

... stainless steel; Brass washer Φ60*2.5mm Friction wheel Φ65*7.5mm Power supply 220VAC 50Hz Standard IEC 60730-1 Figure 8, Annex A Indelibility of markings A.1...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

48rpm Test Rate Label Marking Abrasion Test Machine

... from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional equipment.used for testing the controller marking durability performance. IEC Test Equipment Parameters: Equipment Markings durability tester Test station 1...

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Submit your “iec 60730 1 figure 8 markings durability tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD Products: 48rpm Test Rate Label Marking Abrasion Test Machine
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 60730 1 figure 8 markings durability tester” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0