Stainless Steel IEC 62368 Figure V.5 Terminal Probe
|
...Figure V.1 V.2 V.3 V.4 V.5 Telecom Terminal Test Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe......
Guangzhou Shice Equipment Co., Ltd.
|
IEC 62368-1 Clause V.1.6 Figure V.5 Terminal Probe 20mm±0.2 mm
|
... rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. Test sample:Easily accessible ......
Sinuo Testing Equipment Co. , Limited
|
Nylon + Stainless Steel Terminal probe IEC62368-1-Figure V.5
|
... 0,1 N and with the length limited to 20 mm ± 0,2 mm. 1, Test Probe Length :20mm 2, Test Probe Diameter:1.0 (0, +0.005)mm 3, Dam- sphere Diameter:35mm 4, Handle Diameter:10mm 5, Handle Length :100mm 6, According to IEC61032 figure 4 (the Test probe D)...
KingPo Technology Development Limited
|
IEC 62368 Test Probe Kits
|
... 20 mm Terminal Probe 1) Straight Unjointed Test Probes 2) Figure V.2 - Jointed Test Probe 3) Figure V.3 - Blunt Probe 4) Figure V.4 - Wedge probe 5) Diameter 1 mm, Length 20 mm Terminal Probe Company introduction HK LEE HING INDUSTRY CO., LIMITED are...
HK LEE HING INDUSTRY CO., LIMITED
|
Ф1.0mm Wire IEC Figure 4 Terminal Test Probe D
|
IEC61032 Test Finger Probe Figure 4 Test Probe D With 1mm Diameter Wire Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 4 test probe D. IEC 60529 Degrees of protection provided by enclosures (IP Code......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Nylon Handle Small Test Pin Probe For Electronic Equipment
|
...Probe HT-I30 Standard:BS1363.1 clause 12.6.1 figure 1 and IEC 60065. Application:It is used to test for the electronic equipment to see whether the hidden dangerous parts of the terminal device of can be touched. Sample range:Plug and cover. Feature:Nylon handle with steel prob. Parameters: Model HT-I30(BS probe,End rounding) HT-I30A Probe......
shanghai kerang technology co ltd
|
Bently Nevada 133827-01 3500/60 IO Module External Termination
|
...Termination Description 3500/60 133827-01 Successful completion of the followina procedure assures proper transducer calibration. 1. Connect test equipment as shown in Figure 3-1. 2. Adjust the spindle micrometer on the Tk3 test and calibration kit until it indicates 20 mils (0.51 mm). 3. Insert the probe into the Tk3 probe holder. Adiust the probe......
Achievers Automation Limited
|
Yokogawa VI702-S1 Figure Vnet/IP Interface Card S9610DK-00
|
.... Displays a menu for turning analog signal input channels on and off, for expanding and reducing the vertical axis, and for setting the vertical position, coupling, probe type, offset voltage, bandwidth limit, linear scaling, and waveform labels. Also,...
TLU Technology Co., LTD
|
Submit your “figure v 5 terminal probe” inquiry in a minute :