IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings
|
...Figure 7 Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard requirements of IEC61032 fig.7 test probe 11, IEC 60065:2014 clause 9.1.7, etc. This probe may be used to verify the protection of persons against access to hazardous parts and to verify the mechanical strength of openings in the enclosure of internal barriers. Probe Dimension: Probe...
Sinuo Testing Equipment Co. , Limited
|
IEC62368-1-2018 Edition 3.0 Annex V.1.3 Test Method 2 Unjointed Test Probe
|
...or Figure V.2 are further tested by means of a straight unjointed version of the respective test probe applied with a force of 30 N. If the unjointed probe enters the openings, test method 1 is repeated, except that the applicable jointed version of the...
KingPo Technology Development Limited
|
IEC 61032, Figure 9 short test probe pin, test pin,test probe,probe test
|
... with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 IIEC 61032, Figure 9 short test probe pin Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel....
ALLIED TESTING (HK) CO.,LTD.
|
IEC61032 Figure 9 Finger Test Probe
|
...15 0 -0.1 4 Ф25±0.2 5 4 6 Ф10 7 20 Standard Test Probe Kit: IEC61032 Figure 2 Test Probe B standard test finger IEC61032 Figure 16 Test probe 41 Test Thorn Probe IEC61032 Figure9 Test probe13, short pin Information: This pin is intended to verify the...
Guangzhou Shice Equipment Co., Ltd.
|
Ф1.0mm Wire IEC Figure 4 Terminal Test Probe D
|
IEC61032 Test Finger Probe Figure 4 Test Probe D With 1mm Diameter Wire Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 4 test probe D. IEC 60529 Degrees of protection provided by enclosures (IP Code......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
UL6500 Figure B.1 / IEC60950 Figure 2C Telecom Test Probe
|
...Test Probe Complies With IEC60950 Figure 2C Product information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of information technology equipment to see whether they have sufficient protection. Technical parameters: Hot Tags: iec60950 figure......
Dongguan Kingpo Technology Limited
|
IEC 61032:1997 Figure 14 Milling Test Probe 31 of Access Probes
|
...Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Probes specifically intended to verify the protection of persons against access to hazardous mechanical parts. Specification: Test Probe 31(Grinding Probe) 1. According to : IEC61032-1997 fig 14 2. The Test...
HK LEE HING INDUSTRY CO., LIMITED
|
Unjointed Finger Probe Test Meets IEC61032 Standard Figure 7 Requirements
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of...
Pego Electronics (Yi Chun) Company Limited
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of...
Guangzhou HongCe Equipment Co., Ltd.
|
Iec 61032 Test Ul Finger Probe 11 For Unjointed Test Finger
|
...Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test...
SKYLINE INSTRUMENTS CO.,LTD
|
Submit your “figure 7 unjointed test probe” inquiry in a minute :