Alarming Function Electrical Safety Test Equipment 5~32A 10~600mΩ Earth Resistance Tester
|
...Resistance Tester Electrical Safety Test Equipment 5~32A/10~600mΩ 1. Introduction Ground Resistance tester (earth resistance tester) is applied to test the ground resistance between conductive parts and earth terminal. Ground resistance is one of important index of safety performance of various electrical equipment. It measures the resistance of the ground loop at a high current (like 10A, 25A or 70A), and also tests......
Pego Electronics (Yi Chun) Company Limited
|
Household Appliances Electrical Safety Test Equipment 2U IPC Configuration
|
...appliances safety certificate authorities and scientific research institutions. 2. Test items AC Hi-pot Insulation resistance Grounding resistance Leakage current Low voltage start-up No-load power 3. Standard accessories Power cord×1, foot switch×1,...
Qingdao AIP Intelligent Instrument Co., Ltd
|
High Efficient Electrical Safety Test Equipment For Abrasion Resistance Tester
|
....5 mm)which is a little bigger than fine-wire thermocouples. Attention should be paid to power socket which should be connected with grounding electrode thus to make sure the safety of welding personnel when operating. The welding part is adopted Ⅲ...
KingPo Technology Development Limited
|
HC9910A 6 Station 0-150℃ High Precision Plug Pin Temperature Rise Tester 0-125A Current Test ＜12V Voltage 220V 50HZ Power Supply IEC UL Standard Electrical Safety Testing Equipment Plug Socket Tester
|
... Tester Product Introduction HC9910A is designed for electrical components such as plug pins. It has 6 test stations and can test multiple samples at the same time. The device simulates actual working conditions through a programmable current load module,...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60112 Tracking Index Tester Electrical Safety Test Equipment
|
...Tester Electrical Safety Test Equipment IEC60112 IEC60335-1 IEC60598-1 Electric Leakage Tracking Index Tester Product information: The tester is designed and manufactured according to the standard requirements of IEC60112,IEC60335-1,IEC60598-1,UL746A and ASTM D3638-92 . The working principle of the leakage tracking test(tracking index testing......
Dongguan Kingpo Technology Limited
|
ISO 6469 Electrical Safety Testing Equipment For Electric Commercial Vehicles
|
...Electrical Safety Test System For Electric Commercial Vehicles Complied Standards & Clauses ISO 6469-1:2019 Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage system (RESS) GB 38032-2020 Safety Requirements for Electric Buses ... Equipment Overview For the vehicle safety test and high voltage safety test of new energy vehicles (commercial vehicle), we launch SNE6809CS series special safety...
Sinuo Testing Equipment Co. , Limited
|
DlT-I IEC156 Electric Oil Volume Resistivity Tester
|
...Electric Oil Volume Resistivity Tester Introduction: DlT-I IEC156 Electric Oil Volume Resistivity Tester oil cup adopts a three-electrode structure in accordance with the national standard GB/T5654-2007, and the distance between the electrodes is 2mm, which can eliminate the influence of stray capacitance and leakage on the dielectric loss test results. DlT-I IEC156 Electric Oil Volume Resistivity Tester......
Delta Technology (Chongqing) Co., Ltd.
|
3mm Cylindrical Steel Test Tod Used For Electrical Safety Testing IEC 60884 : 2022
|
3mm Cylindrical Steel Test Tod Used For Electrical Safety Testing IEC 60884 : 2022 Product Overview: The 3mm test rod conforms to the IEC 60884-1:2013 clause 24.11 requirement. A cylindrical steel rod, having a diameter of 3 mm and a hemispherical ......
Sinuo Testing Equipment Co. , Limited
|
GB T4207 Electric Evaluate Leakage Resistance Tester
|
GB/T4207 Electric Leakage Detector Evaluate Leakage Resistance Tester Application:The leakage tracking tester meets the GB/T4207 test standard. A rectangular platinum electrode was used, and the force of the two poles on the sample was 1.0 N; 0.05 N, ......
Guangdong Aisry Instrument Technology Co., Ltd.
|
Scratch Resistant Pin Electrical Safety Test Probe of IEC 60335-1
|
...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.......
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “electrical safety testing resistance tester” inquiry in a minute :