IEC 61386-22 Figure 101 Rigid And Corrugated Casing Bending Test Apparatus For Conduits Test
|
... materials. First, according to IEC61386-22 Section 10.4.103 and Figure 101, bend to the left at an angle of 90°±5°, and return to the vertical position. After 1 minute, bend to the right again at 90°±5°, and then return to the vertical position and...
Sinuo Testing Equipment Co. , Limited
|
IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ......
Sinuo Testing Equipment Co. , Limited
|
IEC 60227-1 Cable Testing Equipment Bending Test Apparatus With 60 Per Minute Flexing Rate
|
... of cord of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a weight having a mass of 0,5 kg. A current of about 0,1 A shall be passed through the conductors. The sample shall be bent backwards and forwards in a...
Guangzhou HongCe Equipment Co., Ltd.
|
Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus
|
... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable
|
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......
KingPo Technology Development Limited
|
IEC60851-3 Bending Test Apparatus For Flat Wires With Test Bars
|
...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending......
Advanced Instruments Co.,Limited
|
Mobile Phone Case Bending Testing Machine Phone Bending Strength Test Instrument Manufacturer Price
|
...case bending testing machine Mobile phone case bending testing machine is mainly used for mobile phone protection for bending test;During the test, the sample is fixed on the fixture, and repeated bending is carried out under the specified bending Angle and times to judge the bending strength. Mobile phone case bending testing machine Product parameters: Test station 1 Test Angle 10-150 (touch screen setting) Test......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
|
...Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus......
Guangzhou Shice Equipment Co., Ltd.
|
Hydraulic Construction Material Testing Equipment Bending Test Apparatus
|
Electro-Hydraulic Servo Microcomputer Control Universal Test Machine Compression Bending Product Profile The testing machine is mainly suitable for steel strand stretching and metal material stretching, compression, bending, shearing and other tests. ......
Chengdu Recen Technology Co., Ltd.
|
Submit your “corrugated casing bending test apparatus” inquiry in a minute :