IEC60065 Clause 8.21 Mandrel Test Device 10° And 230° Rotate Angle
|
...following: Three test samples, each individual sample consisting of three or more layers of non-separable thin sheet material forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure 14) as shown in...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60065 Figure 16 Mandrel Test Device For Insulation Anti Damage Strength Verification
|
... Application: Insulation anti damage strength verification for non separable thin layer materials. Test sample: Non separable thin layer material. Feature: The position of 10°and 230°are set with mechanical limit, not only to ensure the accuracy of...
KingPo Technology Development Limited
|
IEC 60335-1 Clause 21 And Annex B.101 Tumbling Drum Free Fall Test Device
|
...Clause 21 And Annex B.101 Tumbling Drum Free Fall Test Device Standards & Clauses: This tumbling bucket free fall test apparatus conforms to the requirements of the standard IEC 60068-2-32 - Test procedure 2 in accordance with the requirements of IEC 60335-1 clause 21 and Annex B.101, IEC 60335-2-101:21.101, IEC 60065:2014 clause 12.3 and others. The equipment is suitable for testing......
Sinuo Testing Equipment Co. , Limited
|
IEC60335-1 Clause 21.2 Dielectric Strength Test Device With 30N Loaded Hardened Steel Pin
|
...-1 clause 21.2, a hardened steel pin is used as a electrode during the dielectric strength test. After the scracth test, the device should work with a hipot tester to test the withstand dielectric strength of the accessible parts of the solid insulation....
Pego Electronics (Yi Chun) Company Limited
|
IEC 62196 Charging Plug Tester EV Socket Mechanical Test Device Endurance Tester
|
...Test Device Endurance Tester Complied Standards & Clauses Conforms to IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Product Overview The servo motor drive mechanism is used to perform linear plug-and-pull repetitive actions on the sample, and an external load can be connected for on-off testing......
Sinuo Testing Equipment Co. , Limited
|
IEC60884 Figure 14 100N IEC Test Equipment , Non Solid Pins Testing Device
|
...ch is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a ......
Guangzhou Shice Equipment Co., Ltd.
|
Mandrel IEC Test Equipment 150N Force Manual Control
|
Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests’ clause 26.3.4; IEC 60065-1 ‘Audio, video and similar electronic apparatus – Safety requirements’ clause 8.21......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60335-2-25 Clause 21.101 35N Impact Device And 65N Impact Device For Microwave Door Assembly Test
|
...Clause 21.101 35N Impact device and 65N Impact device for Microwave Door Assembly Test Items Description 35N Impact device According to the standard: IEC 60335-2-25-CL.21.101 spring constant: 1.05N/MM Force:35N 65N Impact device According to the standard: IEC 60335-2-25-CL.21......
Dongguan Kingpo Technology Limited
|
Device for testing non-solid pins NP-1
|
...test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a ......
shanghai kerang technology co ltd
|
Submit your “clause 8 21 mandrel test device” inquiry in a minute :