Home > Electrical Equipment & Supplies > Low Voltage Products > Power Distribution Equipment >

Clause 23 3 Cord Flexing Test Equipment

1-10 Results for

clause 23 3 cord flexing test equipment

from 9 Products

PLC Control Power Cord Flexing Test Equipment According To IEC60335-1

....14 and figure 8, IEC60335-2-14 clause 25.14, IEC60884-1 clause 23.4 and figure 21, AS/NZS3112 clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending and swing testing on power cords, plugs and sockets,...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Clause 23.3 Internal Flexible Cord Flexing Test Equipment IEC 60335-1

... flexing resistance test on the electrical connections and internal wires of different parts of the appliance that can move with each other in normal use or during user maintenance. Technical arameters: Applied standard IEC 60335-1 Applied clause 23.3...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 60335-1 Household Appliance Test Equipment Power Cord Flexing Test Apparatus

... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for power cord flexing endurance tester of...

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

IEC60335-1 clause 25.14 Figure 8 Power Cord Flexing Test Apparatus Testing the Protection Capability of Cord

IEC60335-1 clause 25.14 Figure 8 Power Cord Flexing Test Apparatus Testing the Protection Capability of Cord Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard ......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC60335-1 Clause 25.14 Supply Cord Flexing Test Apparatus With One Working Station

IEC60335-1 Clause 25.14 Supply Cord Flexing Test Apparatus With One Working Station Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 ......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

AC220V 50HZ Power Cord Flexing Test Apparatus With Digital Display

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved...

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

60RPM Flexing Test Household Appliance Test Equipment

...Flexing Test PLC Control Standard: IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements clause 23.3, clause 25.14 and figure 8, IEC 60335-2-23 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care clause 11.101 Application: It is used to check that the supply cord......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Flexible Cable Laboratory Test Equipment Torque Testing Machine FCT-1 IEC60884

Flexible Cable Torque Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord ......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Cable Anchorage Pull Force and Torque Test Apparatus for Charging Station

Cable Anchorage Pull Force and Torque Test Apparatus for Charging Station Complied Standards & Clauses It is designed and manufactured according to IEC 61851-23:2023 clause 11.6.102 and Figure 110, Figure 111 and Table 114. Product overview Samples and ......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Submit your “clause 23 3 cord flexing test equipment” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Sinuo Testing Equipment Co. , Limited Products: Cable Anchorage Pull Force and Torque Test Apparatus for Charging Station
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “clause 23 3 cord flexing test equipment” inquiry

*From:
Your email address is incorrect!
To: Pego Electronics (Yi Chun) Company Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0