IEC60309-1 2012 Vehicle Testing Equipment 8 Channels Connector Temperature Rise 0 To 400°C Test System
|
...use environment, and collects the temperature rise within a certain period of time and compares it with the standard requirements. It is used for testing the temperature rise of plugs and sockets of charging ports interface after passing the rated current,...
Sinuo Testing Equipment Co. , Limited
|
Electric Vehicle Charging Connector Withdrawal Test Equipment IEC 62196-1
|
... Overview It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technical Parameters The test plug, according to the relevant standard sheets, shall have finely ground contacts of...
Sinuo Testing Equipment Co. , Limited
|
IP20 2 Channel Electric Vehicle Battery Tester 5V - 300V
|
... . This battery test system is distinct from high - level accuracy , stability , dynamical rapid response speed , and multi - channel flexible features . 2. The CE-6000 system is available for the Direct Current Internal Resistance ( DCIR ) , Cycle Life,...
Neware Technology Limited
|
Test Equipment ATE High Voltage Six Channel Fast Charger Power Test System
|
Test equipment ATE Power test system High voltage six-channel power test system Fast charger test system The power automation test equipment of Chuanggrui is mainly used in the automatic test of 5G communication power supply, PC and server power supply, mining power supply, industrial power supply, aerospace power supply, LED drive power supply, TV power supply, mobile phone fast charger, power tool charger, new energy vehicle charger, vehicle...
Dongguan Chuangrui New Energy Co., Ltd
|
EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator
|
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to...
Pego Electronics (Yi Chun) Company Limited
|
Battery Pack Module Charge And Discharge EV Battery Life Cycle Testing Equipment
|
Battery Pack Module Charge and Discharge EV Battery Life Cycle Testing System Description: Lithium batteries for electric vehicles Lithium battery for electric bicycle Energy storage lithium battery Input AC AC 380V ±15%/50/60±5Hz Output Power 24 KW Input ......
Dongguan Haida Equipment Co.,LTD
|
IEC 62196-1 Connection Set Conductive Charging For Electric Vehicles Test Machine
|
...Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC 61851-1. Some charging can be achieved by direct connection from an electric vehicle...
Guangzhou HongCe Equipment Co., Ltd.
|
Vehicle LED Aging Machine Test Equipment With Electronic Load Aging
|
..., current and power by computer software 2. Support parallel connection of channels under any load modes and meet power extension of products 3. Support power cc from low voltage to high voltage and from low current to ......
Shenzhen CPET Electronics Co., Ltd.
|
Battery Pack Module Charge And Discharge EV Battery Life Cycle Testing Equipment
|
|
Battery Pack Module Charge and Discharge EV Battery Life Cycle Testing System Description: Lithium batteries for electric vehicles Lithium battery for electric bicycle Energy storage lithium battery Input AC AC 380V ±15%/50/60±5Hz Output Power 24 KW Input ......
Hai Da Labtester
|
IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...
KingPo Technology Development Limited
|