100N Force Value Capacity Servo Control/Non-woven Fabric Internal Bond Testing with ±0.5% Speed Accuracy
|
100N Force Value Capacity Servo Control/Non-woven Fabric Internal Bond Testing with ±0.5% Speed Accuracy *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-......
Infinity Machine International Inc.
|
90 Degrees Angle TAPPI Paper Testing Equipments For Internal Bond Impact Test
|
...Testing Equipment for Internal Bond Impact Test 90 Degrees Angle 1. Quick Details Alternative name Internal bond impact tester Function testing internal bond strength of paper and board Feature Electric drive Weight 91kg Volume 70×34×60cm Test standard TAPPI-UM403 2. Description Internal Plybond Tester is applied to testing internal bond strength of paper and board. Test......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
TAPPI-T569pm Internal Bonding Strength Tester Internal Plybond Test Machine for Cardboard
|
...Internal Bonding Strength Tester Internal Plybond Test Machine 1. Use Intensity of interlayer combination (combination) refers to the ability of cardboard plies to resist separation, which is a reflection of the paper bonding ability. Interlayer peel strength can be accurately measured with an internal bond strength tester, interlayer peel strength tester, internal bond strength tester, internal bond......
DONGGUAN LONROY EQUIPMENT CO LTD
|
ISO15754 Scott Type Paperboard Scott Internal Bond Strength Tester
|
...Internal Bond Strength Tester (automatic internal bond strength tester, Scott internal plybond tester, interlayer bond strength tester, internal bond strength tester, etc.) is mainly used to test the Z-direction tensile strength of paper and paperboard (ie, internal bond strength or interlayer bonding). Dedicated testing instrument for strength. Standards: Conforms to TAPPI T 541 Internal Bond......
Wuhan Bonnin Technology Ltd.
|
Scott Type Paper Cardboard Corrugated Internal Bond Tester
|
...). It also can be used for internal bond strength testing for paper composite materials, film composite materials and other slice materials. Such as bobbin fibre paper, whiteboard, brown paper, linerboard, ......
Gester International Co., Ltd
|
Flexible Cable Retention Tester 100N Tensile Strength Test IEC 60884-1 Single Station High Efficiency Testing
|
... tester is the "safety guard" on your production line, specially designed to verify the connection reliability of wires and cables and electrical accessories. It is not only a cold test equipment, but also the guardian of your product quality -...
Guangzhou HongCe Equipment Co., Ltd.
|
ISO Loop Tack Measurement Machine , 0-100N Loop Tack Testing Instrument
|
...100N Loop Tack Testing Instrument Standard FINAT(FINAT test method No. 9: loop tack measurement), PSTC-16(Loop tack), ASTM D6195-03(Standard test methods for loop tack), GB/T31125-2014(Test method for initial viscosity of adhesive tape - ring method) and etc. Test Principle Fully contact the loop sample and standard float test......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
IEC60950 Household Electronic Ground Bond Test Equipment Fuse 2-500mΩ
|
... well as the international electrical committee standards such as IEC60335-1, IEC60950, IEC60598-1, IEC60745-1, and IEC60990. General parameters: PLC remote control Signal input: ......
Sinuo Testing Equipment Co. , Limited
|
100N Plug Socket Test Equipment For Non - Solid Pins Test
|
...Test Equipment Device for Testing Non-solid Pins for IEC60884-1 Figure 14 With 100N Weight Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 14.2, figure 14 Application: Pins of portable accessories shall have adequate mechanical strength. This device is use to test the mechanical strength of Pins of portable accessories. Plug Socket Test Equipment Test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Calibrated Power Cord 100N Tension Torsion Testing Machine IEC60335-1
|
... testing machine can be provided with calibration certificate authorized by ISO17025. It is made according to the standards of IEC60335-1 clause 25.15, IEC60598, GB7000, GB2486 and etc., It is applied to test the tension and torque on the terminals of...
Pego Electronics (Yi Chun) Company Limited
|
Submit your “100n internal bond testing” inquiry in a minute :