10 Watts 4GHz Amplifier Dummy Load Wide Frequency Range
|   | 
                                            10 Watts 3.8GHz 4GHz 4.3-10 Male RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy...                                         
                                            HeFei Vinncom Science And Technology Co.,LTD
                                         
 | 
10 Watts 4GHz Amplifier Dummy Load Wide Frequency Range
|   | 
                                            10 Watts 3.8GHz 4GHz 4.3-10 Male RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-10W-OPm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface 4.3-10 Male Handling Power (Watt, max) 10......                                         
                                            HeFei Vinncom Electronic Technology Co.,Ltd.
                                         
 | 
10.5KV 3MW Dummy Load Bank 3 Phase AC Variable For Generator Testing
|   | 
                                            10.5KV 3MW Dummy Load Bank 3 Phase AC Variable For Generator Testing Product Description The system can be used with a computer to realize the intelligent control, automatically completing the special test to all electrical parameters of generating set......                                         
                                            Hebei Kaixiang Electrical Technology Co., Ltd
                                         
 | 
2 Watt Rf Termination Load , Coaxial Dummy Load DC-3GHz Connector 50 OHM Impedance
|   | 
                                            ...watt rf dummy load Termination Load (DC-3GHz) connector Specification Temperature range -40~+85°C Vibration 100m/s2 (10~500Hz) Impedance 50 OHM Frequency Range DC – 11GHz Working Voltage 2700V max Break-down Voltage 4000V rms @ sea level Contact resistance ≤0.4 OHM @ inner contact ≤1.5 OHM @ outer contact Average power 3KW max Insulation resistance ≥10000M OHM VSWR ≤ 1.10......                                         
                                            SHENZHEN ZD TECH CO., LTD
                                         
 | 
100 Watt RF High Power Dummy Load Din Male Connector 160dBc PIM VSWR 1.2 IP 67
|   | 
                                            ...Load Dummy Load 4.3 - 10 or Din Male Connector 160dBc PIM Description: 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm 4. IP 67 , outsider , good waterproof. 5. Connector :4.3-10 male Specification: Type No. Load......                                         
                                            Lenolink Telecommunication Co.,Ltd
                                         
 | 
TNCA Male 2 Watt RF Coaxial Load Termination 23.5mm / 0.925″ Length DC - 18GHz
|   | 
                                            ..., VSWR 1.4:1 (max) for DC~18GHz, 500 cycles durability and -55°C~+125°C operating temperature. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50 Ω, including SMA, SSMA, SMP, SSMP, CSMP,...                                         
                                            Xi'an Elite Electronic Industry Co., Ltd.
                                         
 | 
100 Watt Dummy Load Coaxial Cable Connectors 1-4 Generation With Gold Flash
|   | 
                                            High Power RF Connectors 1-4 generation 100 watt dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the ......                                         
                                            Dalee Electronic Co., Ltd.
                                         
 | 
500KW Resistive Dummy Load Bank for Generator Testing
|   | 
                                            500KW Resistive Dummy Load Bank for Generator Testing Compact and Lightweight design, equip with castors and lifting lugs that is ideal for moving from job site to job site or within your facility. It offers the most robust, high-capacity designs in the ......                                         
                                            Hebei Kaixiang Electrical Technology Co., Ltd
                                         
 | 
Gold Wire Wound Power Resistor Dummy Load 1 Ohm 20 Watt Resistor For Elevator
|   | 
                                            ... Housed Dummy Load Wirewound Power Resistor We also can make uncommon product per customers requirements. Features: 1, Resistance range: 0.01 ohm - 2K ohm 2, Power: 20W 3, Working Voltage: 180V 4, Resistance tolerance: ±1%,±2%,±5%,±10%. 5, High......                                         
                                            Shenzhen Winsun Technology Co., Ltd.
                                         
 | 
50ohm 10 Watt Dummy Load Connector N Coaxial Fixed Terminations 17×53.3mm
|   | 
                                            Coaxial Fixed Terminations Series 50Ω 10w Connector N DC-6 Max VSWR1.2 17×53.3mm Coaxial fixed terminationsabsorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave ......                                         
                                            Shenzhen Yulongtong Electron Co., Ltd.
                                         
 | 
