CG-AR MIMAKI Cutting Plotter Roll To Roll Plotter Printer And Cutter

"Stay sharp" More profit per cut
CG-AR Series: Roll to Roll Cutting Plotter

"CG-AR Series" are the entry-model of cutting plotter with improved cutting performance, compatibility with a wide range of cutting materials, and enhanced usability, all at an affordable price.

In addition to cutting letters, labels, and stickers, the CG-AR newly supports full cutting and folding lines of cardboads. It can also produce packages up to A3 size by using dedicated options.

---

Product outlines

• Realizing a cut pressure of 550 g, which is the highest in the entry class, expanding the range of cuttable materials
• The maximum cutting speed is 105% of the previous model for greater productivity
• New lineup options for cardboard full cutting
• Easy to cut output from Windows plotter driver
• Equipped with an ID cut function, realizing efficient print & cut in seamless coordination with Mimaki's printers
• "Mimaki Remote Access (MRA)" enables to check the machine operation status and operate the panel from a distance

• Line-up

  ---

  

  ---

  CG-60AR

  Effective cutting area 606mm (23.8")
  
  *Sheet basket and stand are optional.

  ---

  
  

  ---

  

  ---

  CG-100AR

  Effective cutting area 1,070mm (42.1")
  
  *Sheet basket is optional.

  ---

  
  

  ---

  

  ---

  CG-130AR

  Effective cutting area 1,370mm (53.9")
  
  *Sheet basket is optional.

  ---

  Specifications

  		CG-60AR	CG-100AR	CG-130AR
  Acceptable sheet width		90 - 740 mm (3.5 - 29.1")	90 - 1,250 mm (3.5 - 49.2")	90 - 1,550 mm (3.5 - 61.0")
  Effective cutting area *1		606 mm × 51 M (23.9" x 167.3')	1,070 mm × 51 M (42.1" x 167.3')	1,370 mm × 51 M (53.9" x 167.3')
  Maximum speed		Cutting: 73 cm/s (28.7"/s), Moving at 45° direction: 103 cm/s (40.5"/s)
  Adjustable speed range		1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment) 10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7"/s (2.0"/s step adjustment)
  Mechanical resolution		X direction: 2.5 μm, Y direction: 5 μm
  Command resolution		25 μm, 10μm(MGL-IIc) / 100 μm, 50 μm(MGL-Ic1)
  Repeatability *2		± 0.2 mm / 2 M
  Effective Repeatability		586 mm × 2 M	1,050 mm × 2 M	1,350 mm × 2 M
  Maximum pressure		550g
  Range of down pressure	Cutter	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
  	Pen	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 150g (10 g step)
  	Creasing tool	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
  Acceptable sheet *3*4		Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet and Cardboard (used in combination with an optional sheet table)
  Acceptable tool *5		Eccentric cutter, Creasing tool, commercially available ball-point pen
  Type of command		MGL-IIc / MGL-Ic1
  Interface		USB, RS-232C, Ethernet
  Receiver buffer size		About 27 MB as standard (17 MB when sorting is effective)
  Operational environment		Temperature: 5 - 35 degC (41 - 95 degF), Humidity: 35 - 75 ％ Rh (Non-condensing)
  Power supply		AC 100 V - 240 V 1A 50/60Hz
  Power consumption		168W or less	228W or less
  Dimensions(W×D×H)		1,010 × 355 × 355 mm (39.8 × 14.0 × 14.0") 1,010 × 580 × 1,160 mm *6 (39.8 × 22.8 × 45.7") *6	1,510 × 580 × 1,160 mm (59.4 × 22.8 × 45.7")	1,810 × 580 × 1,160 mm (71.3 × 22.8 × 45.7")
  Weight		17kg (37.5 lb) 27kg (59.5 lb) *6	35kg (77.2 lb)	43kg (94.8 lb)
  Stand		Options	Standard equipment