3-Way Diverter Valve Double Switch Angle Valve One-inlet Two-outlet Angle Valve Double Handle Angle Valve

Specification

What is 3-Way Diverter Valve?

A 3-Way Diverter Valve is a type of valve with three ports (one inlet and two outlets). Its core function is to control the direction of water flow. By rotating the handle or switch, one can determine whether the water flow goes from the inlet to outlet A or to outlet B.

Working Principle of 3-Way Diverter Valve:

Inside the valve body, there is a rotatable cartridge. When the handle is turned, the cartridge rotates accordingly. The cartridge is equipped with flow ports that align with or seal off different passage combinations at various rotational positions, thereby achieving water flow distribution and switching.

Applications for 3-Way Diverter Valve:

1. Kitchen/Washing Machine: Connects the washing machine and the sink's faucets. Switch to the washing machine when washing, and to the faucet usually.

2. Shower System: Used to switch between the overhead showerhead, hand showerhead, and lower spout.

3. Water Purification System: Install a3-way diverter valve on the cold water pipe under the kitchen sink. One outlet leads to the regular faucet, and the other to the water purifier, allowing you to manually switch between using purified water.

4. Heating System: Used in floor heating or radiator systems to distribute hot water to different pipes for circulation.

Common Problems and Troubleshooting

Q1: What should I do if the valve is leaking?

• Leakage at the joint: It is usually caused by insufficient Teflon tape winding or aging and damage of the sealing ring. Simply rewind the Teflon tape or replace the sealing ring to fix it.
• Leakage at the bottom of the valve cartridge: Typically caused by internal wear of the valve cartridge or aging of the sealing ring. Solution: Shut off the main water valve, then purchase a valve cartridge of the same specification and replace the old one.

Q2: Difficult to turn or stuck handle?
It may be that limescale or debris has jammed the valve cartridge. You can try turning it gently repeatedly; if this doesn’t work, you may need to replace the valve cartridge or the entire valve.

Q3: Unable to switch water flow completely?
This may be caused by a damaged valve cartridge that fails to fully align with the water channel, or by internal blockage from debris. Disassembly for inspection or replacement is required.

• Be sure to shut off the main water supply valve and relieve the pressure in the pipeline.
• When wrapping Teflon tape (15-20 turns) around the threaded joint, wrap it in a clockwise direction to prevent it from coming loose during screwing.
• Do not overtighten excessively; otherwise, it may cause thread stripping or valve body cracking. After tightening by hand, use a tool to secure it properly.

We Will Be Your Better Choice!

DSTHERM INDUSTRIAL LIMITED was founded in 2004, belongs to Seefine Group, wins good reputation through so many years hard works in the abroad markets, Dstherm becomes a famous brand among worldwide markets customers.

DSTHERM INDUSTRIAL LIMITED owned factories (ppr system and brass system) which focuses on manufacturing and exporting Ppr Pipe System and Brass products system.

Our main commodities cover:

Ppr Pipe system: Including Normal Ppr Pipe(20mm-160mm), PP-RCT Pipe(20mm-110mm), Ppr UV Pipe(20mm-110mm), Ppr Fiber Pipe(20mm-110mm), Ppr Composite Pipe(20mm-110mm), Ppr-Alu-Ppr(20mm-110mm) , Ppr Aluminum Composite Pipe(20mm-110mm),Ppr Perforated Aluminum Pipe(20mm-110mm), Ppr-Fiber-Ppr-UV Pipe(20mm-110mm), Ppr Nano-Antibacterial Pipe(20mm-110mm), Ppr Copper pipe(20mm-32mm)

Ppr Pipe fittings System: Including ABC three kinds of designs,full range of fittings from sizes 20mm to 160mm. With different kinds of designs meet different customers' markets request. For more details please check our products list.
Regarding to Ppr fittings Brass inserts,we accept common brass, CW617N,DZR,Stainless Steel and so on.

Pex Pipe and Brass Fittings: which include Pex-b Pipe, Pex-Al-Pex Pipes,brass fittings, Such as Pex Fittings, Press Fittings, Compression fittings,Hose pipe fittings, Flare fittings, Solder fittings,etc.

Brass Valves:which includes Angle Valves, Gate Valve, Ball valves, Check Valves, lock valves, Bibcocks, Water tank faucets, Washroom facets.

Brass Accessories: such as Brass inserts, Brass male&female Unions,Brass Ball, Brass Valve cartridges.

Main of our products are exporting to worldwide markets range,including European countries such as Germany, Italy, France,Holland, Austria, North American Market such as America,Mexico,Columbia and so on. Middle East Markets such as Saudi Arabia, UAE, Jordan, Qatar, Bahrain, Lebanon, Oman and so on.Asian Countries such as Thailand, Vietnam, Singapore, The Philippines,Cambodia and South America such as Brazil, Argentina, Chile,Uruguay, Bolivia, Ecuador and so on. All of the products have enjoyed favorable reputation through high quality products and satisfied service with reasonable & competitive prices.

DSTHERM Agent is warm welcomed!
OEM&ODM Customers are accepted too.
Welcome to cooperate with us, we will be always on your side.
DSTHERM, Love Water, Enjoy Life!