| Sign In | Join Free | My entremaqueros.com |
|
| Sign In | Join Free | My entremaqueros.com |
|
| Categories | Small Meter |
|---|---|
| Brand Name: | LONROY |
| Place of Origin: | Guangdong, China |
| Model Number: | XF-02 |
| MOQ: | 1 |
| Funnel hole diameter: | 2.5mm or 5.0mm |
| Funnel angle: | 60 degrees |
| Cup volume: | 25±0.05cm³ |
| Cup internal diameter: | 31±1mm |
| Material: | Non-magnetic corrosion-resistant metal (brass or stainless steel) |
| Funnel-cup distance: | 25mm |
| Weight accuracy: | 0.01g |
| Measuring range: | Powder flow velocity and loose packing density |
| Standard compliance: | GB1482-2010-T, ISO 3923/1-1979 |
| Funnel specifications: | 2.5mm for flow velocity, 5.0mm for density |
| Surface finish: | Carefully polished inner surface |
| Base requirement: | Horizontal and firm, free from vibration |
| Component alignment: | Funnel and cup must be concentric |
| Wall properties: | Sufficient thickness and hardness to prevent deformation |
| Power type: | Electronic |
| Company Info. |
| DONGGUAN LONROY EQUIPMENT CO LTD |
| Verified Supplier |
| View Contact Details |
| Product List |
Hall Flowability Bulk Density Tester/Metal Powder Hall Flowability Meter / Powder Apparent Density Tester
Product Introduction
The XF-02 Hall flowmeter is manufactured according to gb1482-2010-T standard funnel method (Hall flowmeter replaces GB1479-84 and GB1482-84 standard specifications. It is used to test the flow velocity and loose packing density of metal powder and non-metal powder.
This method is only suitable for powder that can flow freely through a standard funnel with a diameter of 2.5mm or 5.0mm.The rest of this standard specifies a method for the determination of powder bulk density that cannot be determined through a standard funnel with an aperture of 5.0mm.
How it works: Powder falls freely from funnel hole to fill cup.In the loose packing state, the loose density of powder is expressed by the mass of powder per unit volume.This standard is equivalent to ISO 3923/1 -- 1979, Determination of loose packing density of Metallic powders -- Part 1: Funnel method |
.
Hall Flowability Bulk Density Tester/Metal Powder Hall Flowability Meter / Powder Apparent Density Tester
Device Structure
1. Funnel: Standard funnel hole diameter D has two specifications, one is 2.5mm in diameter;One is 5.0mm in diameter
Note: Funnel aperture 2.5mm test powder flow velocity funnel aperture 5.0mm test powder loose packing density
2. Funnel Angle: 60 degrees
3. Cylindrical cup: volume 25± 0.05cm3, internal meridian 31±1mm.
4. Fabrication of cups and funnels: The cups and funnels shall be made of non-magnetic corrosion-resistant metal with walls of sufficient thickness and hardness to prevent deformation and excessive wear, usually brass or stainless steel.The inner surface of the funnel and cup should be carefully polished.
5. Bracket and base: Bracket is used for fixing funnel.The base must be horizontal and firm, free from vibration, and used for mounting bracket and cup.The distance between the bottom of the funnel hole and the top of the cup is 25mm, which can be adjusted by positioning block. The funnel and the cup must be concentric.
5. Balance (supplied by the user) : There should be enough measuring range to accurately weigh the sample to 0.01g.
Standard accessories: Mounting bracket funnel (according to actual situation) 25ml measuring cup overflow plate/receiver height positioning block
Hall Flowability Bulk Density Tester/Metal Powder Hall Flowability Meter / Powder Apparent Density Tester
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
IEC 60068 IK Vertical Drop Hammer Testing Device Vertical Falling Weight Test Machine
IEC 60068 0.14J Single Impact Hammer
IEC 60068 6 Grade Spring Impact Hammer Electrical Spring Actuated Impact Hammer Factory Price
0.7J Spring Impact Hammer test Device IEC60068
IEC 60068 0.2J Spring Impact Hammer
DM5200 Intelligent χ-γ Radiation Meter Smart X Radiation Meter
IEC 60335 125mm Standard Test Finger IEC 61032 Test Bending Finger Standard Bent Test Finger
Q61 Concrete Strength Tester,Ultrasonic Concrete Rebound Hammer
IEC 60068 Spring Impact Hammer Calibrating Equipment Calibration Device Spring Impact Hammer Calibrator
