Features
1.Dual Temperature Display
The device can display two independent temperature readings
simultaneously.
Indoor Temperature: The temperature of the environment in which the
device is located is measured by the built-in sensor of the device.
External Temperature: Measure the temperature of another location
(such as a refrigerator, outdoors, baby's room, fermenter, etc.)
through a connected external probe.
This allows users to easily compare the temperatures of two
different areas without moving their devices back and forth.
2.Large Screen Digital Display
Adopting large-sized, high contrast LCD or LED screens.
The digital font is huge and clear, making it easy to read even
from a certain distance or in low light environments.
Usually equipped with backlight function, convenient for viewing at
night.
3.External Probe
Equipped with a precision temperature sensor probe with a long
connecting wire.
Users can place the probe in any location that requires monitoring
but is not convenient for placing the host (such as outdoors,
barbecue grills, fish tanks, air conditioning vents).
Probe cables usually have a certain degree of heat resistance or
waterproofing to adapt to different environments.
4.Electronic Hygrometer
In addition to temperature, the device can also accurately measure
and display the relative humidity (% RH) of the current
environment.
Humidity data is crucial for human comfort, preventing furniture
from mold, protecting musical instruments, and warehouse
management.
High precision and fast response
Using electronic sensors, the measurement results are more accurate
than traditional pointer thermometers.
React quickly to changes in the environment and temperature, and
can update readings in a timely manner.
5.Function Test
1.Press MAX / MIN key once to display the previous maximum /
minimum indoor and outdoor temperature and humidity values;
2.When the MAX / MIN press the RESET button once to clear a
previously memorized maximum or minimum Remeasure
3.When the MAX / MIN 8 seconds after the display returns to the
current temperature and humidity display ℃ /℉ key Celsius and Fahrenheit Conversion
6.Time Debugging
1.ln the initial state, press and hold [MODE] for2 seconds, the
number of minutes the current time starts flashing, press the [ADJ]
to adjust the hours, minutes. In normal time display mode, press the [ADJ] can be converted to
12/24 show.
2.ln the current clock mode (clock and minutes between two blink
once per second), press [MODE] once, switch the display to alarm
mode (clock and minutes between two points is not flashing), press
live [MODE] for 2 seconds, the alarm
time flashes, press the [ADJ] can adjust the alarm time, minute. Alarm mode is displayed, press [ADJ] to set / cancel the alarm
alarm function. After setting press the [MODE] returns to normal time display.
Exclusive Blue White ID Badge Holder Clip Plastic Hanging Clip
