Large Size 3 Port Solenoid Valve for Medium and Normal Temperature Pneumatic Applications

Instructions for Use

①Please install an air filter.

Install the air filter close to the upstream of the valve.

Please select an air filter with a filtration precision of 5μm or less.

②Please set up an aftercooler, air dryer, water collection tank, etc.

Compressed air containing a large amount of condensed water will cause malfunction of valves and other pneumatic equipment. Therefore, please take measures such as installing an aftercooler, air dryer, and water collection tank.

③If a large amount of carbon powder is produced, please install an oil mist separator at the upstream position of the valve to remove the carbon powder.

If a large amount of carbon powder is generated from the air compressor, the carbon powder will adhere to the inside of the valve, leading to malfunction.

④Regarding polarity

This solenoid valve has no +/- polarity.

⑤Applying voltage

When making electrical connections to the solenoid valve, please do not get the applied voltage wrong. Otherwise, it may cause malfunction or coil burnout.

⑥Low-frequency use

To prevent malfunction, switch the valve once every 30 days. (Please note the air source.)

⑦Manual operation

If operated manually, the connected device will start.

Please confirm safety before proceeding with the operation.