8-layer Hybrid PCB Based on RO4350B and FR4 material with Blind Vias

This 8-layer high-frequency hybrid PCB adopts a composite substrate structure, with 10mil RO4350B high-frequency substrate on the top and bottom layers, and FR-4 Tg180 substrate in the middle. It perfectly balances excellent high-frequency signal performance and cost-effectiveness, strictly complies with IPC Class 3 quality standards, and is equipped with special processes such as metal edge wrapping, blind/buried vias and resin plugging. With precise structural control and reliable process quality, it is suitable for high-frequency, high-precision electronic equipment scenarios requiring stable signal transmission.

PCB Specifications

PCB Stack-Up Structure (From Top to Bottom)

RO4350B Substrate Introduction

RO4350B is a high-performance glass-reinforced hydrocarbon/ceramic composite substrate, specially designed for high-frequency, high-speed circuit applications. It features stable dielectric properties, low dissipation factor, and excellent mechanical and thermal stability, making it widely used in various high-frequency electronic products. The material is compatible with standard PCB processing processes, easy to process, and can effectively ensure signal integrity in high-frequency transmission scenarios.

RO4350B Key Features

-Low dissipation factor (Df) and stable dielectric constant (Dk), ensuring minimal high-frequency signal loss

-Low moisture absorption, maintaining stable electrical performance in different environmental conditions

-Excellent mechanical strength and dimensional stability, suitable for multi-layer PCB lamination

-Good compatibility with standard PCB processing equipment and processes, reducing production costs

-Excellent chemical resistance, resistant to common solvents and reagents used in PCB processing

RO4350B Application Fields

-High-frequency communication equipment: RF modules, microwave antennas, signal transceivers and point-to-point digital radio antennas

-Automotive electronics: On-board radar systems, in-vehicle communication modules

-Aerospace and defense: radar systems, missile guidance systems

-Test and measurement instruments: High-frequency test equipment, signal analyzers

-Consumer electronics: High-speed wireless routers, smart wearables, high-frequency wireless devices

RO4350B Processing Points

Inner Layer Preparation

Tooling: RO4350B laminates are compatible with many pinned and pinless tooling systems. Slotted pins, a multiline tooling format, and post-etch punching are generally recommended to meet most registration requirements.

Surface Preparation: Thinner RO4350B cores should be prepared using a chemical process (cleaning, micro-etching, water rinsing, drying); thicker cores are compatible with mechanical scrub systems. It is compatible with most liquid and dry film photoresists and can be processed via standard develop, etch, and strip (DES) systems.

Oxide Treatment: RO4350B cores can be processed through any copper oxide or oxide alternative process for multi-layer bonding, with the optimal treatment selected based on prepreg/adhesive system guidelines.

Drilling Requirements

Standard entry (aluminum or thin pressed phenolic) and exit (pressed phenolic or fiber board) materials are suitable for drilling RO4350B cores or bonded assemblies.

Drilling speeds greater than 500 surface feet per minute (SFM) should be avoided. Chip loads >0.002”/” are recommended for mid-range and large diameter tools, while <0.002”/” for small diameter drills (<0.0135”).

Standard geometry drills are preferred for efficient debris evacuation. Hit counts should be based on PTH inspection. Drill wear is accelerated, but hole wall quality (8-25 μm roughness) is determined by ceramic powder size distribution.

Multi-Layer Bonding

RO4350B laminates are compatible with many thermosetting and thermoplastic adhesive systems. Bond cycle parameters should follow the adhesive system’s guidelines.

Blind Vias and Buried Vias

Blind Vias: Holes that only penetrate from the surface of the PCB (one side) to a specified inner layer, without passing through the entire board. This product is designed with blind vias between Layer 1 and Layer 2, which only connect the top outer layer and the first inner layer.

Buried Vias: Holes that are completely located inside the PCB, connecting two or more inner layers without exposing the surface of the board. This product is designed with buried vias between Layer 5 and Layer 6, which only connect the fifth and sixth inner layers.

Why Use Blind Vias & Buried Vias

Improve Signal Integrity: Blind vias and buried vias shorten the signal transmission path, reduce signal delay, crosstalk and loss, which is crucial for high-frequency signal transmission.

Save Board Space: Compared with through holes, blind vias and buried vias do not occupy the surface space of the PCB, allowing for more dense component layout and improving the integration of the PCB.

Enhance PCB Reliability: Avoiding through holes penetrating the entire board reduces the risk of board warpage and layer separation, and resin plugging further protects the holes from moisture and contamination.

Optimize Assembly Process: Resin-plugged blind vias and buried vias ensure the flatness of the PCB surface, facilitating the soldering of surface-mounted components (SMD) and improving assembly accuracy.

Company Profile

Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipment, radar systems, digital radio frequency antenna and other fields worldwide for 18 years. Our high frequency PCBs are mainly built on 3 high frequency material brands: Rogers Corporation, Taconic and Wangling. Dielectric constant ranges from 2.2 to 10.2 etc.

Bicheng PCB is headquartered in Shenzhen, a city with great economic vitality. Based in China, we adhere to the philosophy of servicing small and medium sized companies offering variety of circuit boards to meet the demands of market.

Main Business & PCB Applications

We maintain the highest standards which support products that exhibit exceptional quality, performance and reliability. We also have divisions of FR-4 circuit board, flexible circuits and metal core PCBs featured as prototypes, small runs to mass production. We actively research and build such high value added PCB projects as HDI, quick turn, impedance control, heavy copper and backplane board etc. This has made our PCB products generate an effective prolongation and complementation, as well as formation of integrated products line ranging from low-end to high-end.The circuit boards are used in the industries of home appliances, portable and consumable electronics, medical filed, aerospace as well as telecommunications etc.

Main Material Partners