3PC Type Electric Ball Valve with Internal Threads Two Way Flow and Manual Actuation

Highlight: 3PC Type Electric Ball Valve with Internal Threads

Product introduction:

The three-piece ball valve is a relatively new type of ball valve. It can be tightly closed with a 90-degree rotation operation

and very low torque. The completely equal inner cavity of the valve body provides a flow channel with minimal resistance

and straight-through flow for the medium. These structural features give it advantages that ordinary ball valves do not have,

such as frictionless switching, non-wearing seals, and low opening/closing torque. This can reduce the specification of thmatched actuator. Equipped with a multi-turn electric actuator, it can achieve precise regulation and tight shut-off of the

medium, and is widely suitable for工况 (working conditions) requiring strict shut-off in industries such as petroleum, chemical

engineering, and urban water supply and drainage.

Product technical parameters:

Product features:

1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe segment of the same length.

2. Simple structure, small size, and light weight.

3. Tight and reliable, the sealing surface material of the ball valve is widely used in plastic, with good sealing performance, and has also been widely used in vacuum systems.

4. Easy to operate, quick to open and close, with only a 90 ° rotation from full open to full close, facilitating remote control.

5. Easy to maintain, the ball valve has a simple structure, and the sealing ring is generally movable, making disassembly and replacement more convenient.

6.When fully open or fully closed, the sealing surfaces of the ball and valve seat are isolated from the medium. When the medium passes through, it will not cause erosion of the valve sealing surface.