Precision machined components are crucial in various industrial
applications where accuracy, durability, and efficiency are
paramount. Among these components, the split self-lubricating
bimetal bushing with graphite stands out for its unique properties
and versatility.
A bimetal bushing is a composite material consisting of two
different metals, often combined through a fusion process. In the
case of a split self-lubricating bimetal bushing with graphite, the
combination typically involves a steel backing with a softer,
lubricious metal such as bronze or lead alloy. The addition of
graphite further enhances the bushing's self-lubricating
properties, reducing friction and wear during operation.
The split design of these bushings allows for easy installation and
removal, making them suitable for applications where components
need to be replaced frequently. The self-lubricating feature
ensures smooth and reliable operation with minimal maintenance
requirements.
The precision machining process ensures that these bushings meet
strict dimensional tolerances and surface finish requirements. This
precision is crucial for applications where precise alignment and
fit are necessary, such as in automotive transmissions, industrial
machinery, and other high-precision equipment.
In summary, precision machined split self-lubricating bimetal
bushings with graphite offer a reliable and efficient solution for
reducing friction and wear in various industrial applications.
Their unique combination of materials and design provides superior
performance and durability, making them a valuable addition to any
precision machinery or equipment.
Introduction of bimetal bearing sleeve,bimetal bushings
We Stock and Manufacture JF800 JF720 JF700 Bimetal Lead-Free Plain Bearings Solutions.JF-08G bimetallic bearing is a novel thin wall solid
lubrication bearing made of JF800 bimetallic material with special
solid lubricant embedded in alloy layer.Bimetallic bearing, is a bimetallic material as the matrix, alloy layer Material
Steel + CuPb10Sn10 + Graphite embedded in a special solid lubricant
made of new thin-wall solid lubrication bearing...Due to the use of
high strength bearing alloy material as the matrix, the ideal
filling material for wear-resistant agent, reasonable diamond block
lubrication design, lubrication area up to more than 25%, therefore, can play a good lubricity and wear resistance performance.Bimetallic graphite lubricated bearings have been used in
automobile gearboxes, generators, elevators, cranes and
metallurgical machinery and other industries.
DIN-G-CuPb10Sn
Pb(%) | Fe(%) | Ni(%) | Zn(%) | Cu(%) |
|---|
8.0-11.0 | ≦0.25 | ≦1.5 | ≦2.0 | 78.0-87.0 |
The bimetallic bearing is a bimetallic bearing, wrapped in steel sheets with a layer of
leaded bronze. Load capacity rather high. Possibility of machining
the inside diameter after assembly. High thermal
conductivity.Precision Machined Components Split Self Lubricating Bimetal Bushing with Graphite
JF08G bimetallic solid inlaid graphite bearing oil-free self-lubricating bearing support ring dry oil-bearing
Material Steel+CuPb10Sn10+Graphite
Description: Its material structure is Steel + bronze + Graphite.
The surface of the alloy is rolled into diamond grooves. The
special lubricant is integrated in the grooves. It has a good property of lubrication and corrosion resistance. It can operate in the state of little or no oil.0
From experience – for practical application
Size | customized |
TYPE | SLEEVE BIEMTAL BUSHING |
Material | Steel+Bronze+Graphite |
Max load capacity P | 140N/mm² |
Max line speed V | Grease Lubrication 2.5m/s |
PV value limit | Grease Lubrication 2.8N/mm²·m/s |
Friction coef u | Grease Lubrication 0.05~0.15 |
Max Working temperature | Grease lubrication 150℃ |
Mating Axis | Hardness ≥53 HRC,Roughness Ra=0.32~0.63 |
Alloy layer hardness | 60~90HB |
Thermal conductivity | 47W/(m·k) |
Coefficient of linear expansion | 18×10-6/K |
Application | starting motor |
Bronze/Steel Bushing
VIIPLUS Self Lubricating Bearing are used on a variety of rotating
equipment, including pumps bushing, compressors bushing, mixers
bushing, steam turbines bushing and other specialty equipment
bushing. They have application in the oil and gas, chemical
processing, mineral and ore processing, and general
industries.whose mechanical strength is high, can be used under
lubricated conditions and high-speed/high-load operation. It can be made from a variety of
different materials, depending on the application, use conditions
and lubrication.
Bimetal bushing Load capability can be improved by oil holes,
grooves, etc., depending on lubrication conditions. In some cases,
a dry bearing can also be used under lubricated conditions.
Gear pump self-lubricating bearing is a core part of the gear pump,
installed on both sides of the uranium gear pump, its support and
anti-friction role, its size accuracy and wear resistance is
directly related to the volumetric efficiency and service life of
the gear pump.
Gear pump shaft sleeve steel bushes bronze bushing parts are
provided by our company, and the use of automatic pressure and
assembly and key size automatic detection technology, can
effectively solve the problem of pressure and assembly tolerance
accumulation, product accuracy decline, to ensure that 100%
qualified products provided to customers.
The Bearing Gard employs static and dynamic sealing technologies to
prevent ingress of contaminants into the bearing housing and ensure
oil retention, even when the equipment is shut down.
Gear pump oiles bearing & bushings
How to choose the gear pump bushings | shaft sleeve bushes oil-free
lubrication bearing
VIIPLUS Company providing technical bushes, in various sectors such
as steel bushes, bronze bushes, graphite bronze bushings, stainless
steel bearings for Water, Waste water, Industrial and Oil & Gas
fields in solutions. Delivers quality products combined with
outstanding service. We are committed to revitalizing our domestic
and international partnerships—with a passion for quality and
restoring customer dedication”Your Powerful Assistant,We are Providing Good Services
Individual sliding bearings & bimetal bearings according to
customer requirements
Gearbox Bushings Valves Bushings Self lubricating bearings for Power Transmission,Flow Control We supply and market Gate, Ball, Plug, Check, and Butterfly valves
bushings and their respective controls and actuators. These valves
bushes are used primarily in the water, wastewater, and industrial
markets.we provide a wide range of Valves bushes in different
sectors a lot of which are in stock for immediate purchase.
Our Product Range: 
• Butterfly Valves bushes
• Gate Valves bushes
• Globe Valves bushes
• Check Valves bushes
• Ball Valves bushes
• Plug Valves bushes
• Plastic Valves bushes
• Safety Valves bushes
• Diaphragm Valves bushes
• Fire Fighting Valves bushes
We can also develop according to customers special request bimetal
bushings size
