When referring to flanged bushings in inch sizes, it typically
means that the dimensions and specifications of the bushings are
based on the inch measurement system. bushings, also known as
oil-impregnated sintered bronze bushings, are self-lubricating
bushings commonly used in various applications where lubrication
may be difficult or impractical.
The flanged design of these bushings allows for easier installation
and retention within housings or other components. The inch size
specification indicates that the dimensions such as the outer
diameter (OD), inner diameter (ID), length, and flange dimensions
are provided in inches.
Some key points to consider when specifying flanged bushings in
inch sizes:
Dimensional Accuracy: Ensure that the inch dimensions provided are
accurate and match the requirements of your application.
Material Selection: bushings are made from oil-impregnated sintered
bronze, which provides good wear resistance and self-lubricating
properties. However, consider other factors like operating
temperatures and chemical compatibility when selecting the
material.
Flange Design: The flanged design provides additional retention and
support. Make sure the flange dimensions are suitable for your
application and housing design.
Installation Considerations: Proper installation is crucial for the
performance and longevity of bushings. Ensure that the bushings are
pressed or installed into their housings without excessive force,
which can damage the material.
Lubrication: Although bushings are self-lubricating, some
applications may require additional lubrication. Check the
manufacturer's recommendations for lubrication requirements.
Remember to consult with your supplier or manufacturer for specific
details and recommendations on flanged bushings in inch sizes to
ensure that you select the appropriate product for your
application.
Self-lubricating steel-backed flanged bushing - inch Size tin
plating or copper plating
Custom Solutions for Demanding Technical Requirements
We work closely with our customers to develop new self-lubricating
bronze bushings solutions that are then added to our list of
catalog bronze bushing products.
Large Inventory of Bronze Bushings, Bronze Bearing and
Self-lubricating Wear Plates. Gleitlager. Bushing Sleeve bearing.
Bushes Catalogs and Brochures Available.
Self-Lubricating Bronze Bushing, Steel Backed Plain Bearing
Metal-Polymer Bearings Bearings Replacement sleeve
Discovery bushing bearing, relating to plain bearings and
self-lubricating bushings material and bushing price ...
Plain-Bearing - Bore size, OD size, Length size, Material
80160/ Plain Bearing - ID=242, OD=247, Length=100mm
80161/ Plain Bearing - ID=300, OD=305, Length=100mm
VIIPLUS SLIDING BEARING Our range offered SME includes Metal Bushing, Steel Sleeve
BushingThrust Washer, Bronze Graphite Plate, Valve Gearbox
Bushings, and more. Besides these, we are also rendering Metal
Coating Self-lubricating bearing Strips, Material Export Service
and more.
Plain bearing materials Plain bearing Strips, Slide paths PAS
Strips Material in detail Strip Metric Streifen, Gleitbahnen |
VSB-10
Impregnated with our own proprietary lubricant, these bushings are
composed of and special material uniformly dispersed within
polyacetal plastic resin, a plastic material offering excellent
bearing characteristics.
VSB-10 Strips, Slide paths PAS
Steel + Bronze Powder + /Fibre Strips
For all the global industry
Provide high-quality self-lubricating products
Wrapped Steel Self Lubricating Bearings Oilless Sliding Series
Characteristics
VSB-10 Streifen, Gleitbahnen PAS
Strips PAS are available as an even material section. This material
section can be used to make sliding elements in a variety
of shapes.
Table of Contents
Material information
Plain bearing production
Characteristics: maintenance-free and robust
Material composition
Models and tables of dimensions
More information
Plain bearing Bearing Material production
Characteristics of VSB-10 strips material
- Very low stick-slip tendency
- Low wear
- Good chemical resistance
- Low friction value
- No tendency to weld to metal
- Extremely swell-resistant
- Does not absorb water
Preferred areas of application
- Maintenance-free operation under dry-running conditions
- Rotating or oscillating movements
- Up to a velocity of 2 m/s
- Linear movements
- Temperature range -200 °C to 280 °C
Strips Material composition
If these material sections are used to create slide paths, they
have the following main functions:
- Absorbing and transferring forces acting vertically to the running
surface
- Fixing moving components to each other
- Ensuring guidance accuracy for axial movements over the entire
service life
Strips are available in two material groups:
- Material group P1 for maintenance-free, dry-running applications
- Material group P2 for low-maintenance, lubricated applications
For the advantages of each group and help deciding which material
group is best for the relevant use, please refer to the information
provided in the section cylindrical bushes, flange liners and
thrust washers.
VSB-10 Steel + Bronze Powder + /Fibre Bushings
· Bushing material suitable for lubricated applications
· self-lubricating bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running
conditions
· Anti-friction bearing suitable for linear, oscillating and
rotating movements
Material is designed to operate without supplemental lubrication
and will perform excellent when lubrication is present. Low friction, low wear rate, good sliding characteristics and very
low absorption are a few of the features of this material. VSB-10 bushings will support rotary, linear and oscillating
motion.
Strusture
1. /Fibre mixture thickness 0.01~0.03mm. It is the contact surface for the
rotating shaft. Minute partides of the layer and the sintered
bronze material combine to create a solid lubricant film, which
coats the shaft.
2. Sintered bronze powder thickness 0.20*0.35mm,A special
composition of powdered copper is thermally fused to the steel
backing. This contact layer acts as an anchor for the layer and
conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel backing. Setting the foundation of the
bushings, the steel back provides exceptional stability, load
carrying and heat dissipation characteristics.
Technical Data
Structure And Composition
· Metal-Polymer Composite Self-lubricating Bushing Material
· Steel Back + Porous Bronze Sinter +
· + Lead
Microsection
| Sliding layer
+ Lead
Porous Bronze Sinter
Steel Backing
|
OPERATING PERFORMANCE |
Dry | Very Good |
Oil lubricated | Good |
Grease lubricated | Fair |
Water lubricated | Fair |
Process fluid lubricated | Fai |
Bearing Properties
GENERAL |
| Unit | Value |
|---|
Maximum load, p | Static
Dynamic | N/mm2
N/mm2 | 250
140 |
Operating temperature | Min
Max | °C
°C | - 195
280 |
Coefficient of linear thermal expansion | Parallel to the surface | 10-6/K | 11 |
Normal to the surface | 10-6/K | 30 |
DRY |
|
|
|
Maximum sliding speed, U |
| m/s |
2.0
|
Coefficient of friction |
|
| 0.03 - 0.20 * |
OIL LUBRICATED |
|
|
|
Maximum sliding speed, U |
| m/s |
＞2.0
|
* Depending on operating conditions
Technical data
Max. load | Static | 250N/mm2 |
Dynamic | 140N/mm2 |
Max. speed | Dry | 2m/s |
Lubrication | >2m/s |
Max. PV (Dry) | Short-time | 3.6N/mm2*·m/s |
Continuous | 1.8N/mm2*·m/s |
Temp. | -195℃~+280℃ |
Friction coefficient | 0.03~0.20 |
Thermal conductivity | 42W (m·k)-1 |
Coefficient of thermal expansion | 11*10-6k-1
|
Availability
Bearing forms available in standard dimensions
- Cylindrical bushes
- Flanged bushes
- Thrust washers
- Flanged washers
- Sliding plates
Metric bearings and imperial bushings made to order: standard
bushing forms in special dimensions, half-bushings, special shapes
obtained by stamping or deep drawing, customized bushing designs
Typical Applications
This material meets the demanding criteria for long life and
maintenance free performance with or without lubrication.
Automotive: tractors, combines, crop sprayers, earth-movers,
graders and other construction, auto machines, specific uses in
power steering cylinders, steering gear thrust washers, disc
brakes, calipers and pistons, shock absorbers, governor linkage,
windshield wiper motor, tilt gear assemblies...
Business machines: photocopy machines, typewriters, mail sorters,
postage meter systems, computer terminal printers and peripheral
equipment, automatic printing devices, mail processing machinery...
Hydraulics and valves: pumps including gear, rotary, water, axial
piston, and other types, ball, butterfly, poppet steam, and other
valves and valve trunnions...
Home appliances: tape recorders, refrigerators, air conditioners,
cleaners, polishers, sewing machines, ovens, dishwashers, clothes
washing machines...And materials handling, marine engine,
packaging, textile equipment, tools...etc.
