Vibrating Screen For Mining Wear-Resistant Steel Plate Multi-Layer Classification

Vibrating Screen For Mining Wear-Resistant Steel Plate Multi-Layer Classification

Introduction
This is a filtering mechanical separation device used for slurry solids treatment. It consists of a screen and a vibrator. The screen size is indicated by mesh size, with mesh sizes below 50 considered coarse and 80 mesh and above considered fine. The vibrator is an eccentric wheel that rotates under the influence of a motor, causing the screen frame to vibrate. As the slurry flows onto the screen surface, coarser solid particles are retained and discharged from one end along the inclined surface. Finer solid particles, along with the slurry liquid, flow through the screen holes into the slurry pool.

Applications
This series is suitable for dehydrating, removing media, desludging, and grading various materials in coal, metallurgy, mineral processing, power generation, light industry, and sugar production. It offers high processing capacity and screening efficiency.

Working Principle
The sieve operates by continuously throwing the material upwards at an angle on the screen surface under the action of agitating forces. The material is loosened during the uplift, and the collision with the screen surface forces particles equal to or smaller than the screen openings to pass through, achieving dewatering, separation, or classification.

Self-synchronization principle: The vibrator of the B-type screen has no forced connection, and there are no gears between the two shafts. To ensure the screen vibrates along a straight path, the two shafts must operate in strict synchronization and in opposite directions. This is naturally achieved in a vibrating system like a twin-shaft screen.

Damper Working Principle: In both operating and parked states, the rubber block does not contact the base opening. It exerts symmetrical pressure on the screen box, maintaining a stable position and eliminating lateral vibration and torsion.

When the screen box vibrates during parked resonant vibration, the screen box amplitude exceeds the gap between the rubber block and the base opening. At this point, the vibration must overcome the dynamic friction between the rubber block and the screen box. Frictional damping dissipates some kinetic energy, limiting the resonant amplitude to within three times the operating amplitude. The damping force is adjusted using an adjustment screw.

Product Display

Product Parameters

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.