Sino SDS2MS DRO Digital Readout Systems TLL RS422 Input For Lathe Milling Machine

Sino SDS2MS Lathe Milling Machine DRO Digital Readout TLL Input

DRO SDS2MS is multifunctional 2-coordinate numerical display gauge.
By different machine tool, this gauge can switch to corresponding function just by changing the parameters.

Upgraded Functions:

1. Radius/diameter conversion.

2. MM/Inch conversion.

3. Absolute/relative conversion.

4. Mid-splitting function.

5. Easy "R" function.

6. Smooth "R" function.

7. PCD hole positioning on circumference.

8. 200 groups zero position memory.

Specifications of DRO SDS2MS Digital Readout System

1. Voltage range: 50 Hz to 60 Hz, AC 85 v to 250 v

2. 15w uses 25 va of electricity.
The third step is to coordinate the number: a, two, and three.

4. Use eight meters of words and symbols to demonstrate how a signed seven display (two or three axes) outputs data information.

5. Net Weight: 2.9 lbs/1.3 kilogram

6. The EIA-422 open collector output signal, TTL input signal, and easy-to-use interface with programmable controller.

7. Permit the input signal frequency to be higher than 100 KHz.

8. Use 10 microns, 5 microns, 2 microns, 1 mu m, and 0.5 microns to link a resolution.

Product image /photos:

The rack in the picture is optioned, not standard product.

Our company, Guangzhou SINO International Trade Co., Ltd is located in Guangzhou city, Guangdong province, China. Guangzhou SINO International Trade Co. LTD is the subsidiary of the SINO group. SINO specializes in the development and manufacture of high-precision measuring products since 2002. It has a series of the world’s most advanced equipment and has been certificated by IS09001, CE, RoHS, and the electrical safety standards for European authentication. The competitive products linear grating ruler and digital readout are famous in the world. With untiring efforts in development in this area since 1989, the best seller in China for the last ten years. 

SINO is the leading linear encoder & DRO manufacturer in China. Our main products included linear scales encoder, magnetic encoder, angle encoder, and DRO displays suitable for milling, lathe, EDM, grinding machine, boring machine and we keep developing and improving to move forward with very good quality. The company has cooperated with many clients from overseas and has obtained consistently high praise from our customers since it was set up. The company tries its best to do well at any aspect from each stitch, each point of procedure of manufacturing to final inspection, packing, and shipment. We insist on the principle of development of 'All we do are clients need' to provide you with excellent service of processing! We sincerely welcome you to visit our company or contact us for cooperation.