Strong Combining Ability PP Fiber Twisted Bunchy Form for Better Dispersion in Crack-Resistant Mix

PP Fiber Twisted Bunchy Form

Product Description

1. This fibre is used to instead of steel fiber for reinforcement to cement concrete. Compared with steel fiber, it has the advantage of easy dispersing and blending, no damage to the mixing equipments, etc

2. The rigid polymer fibre is used polypropylene as its raw material, produced the rough surface treatment by special parallel thread extruding & twisting process. It has high break strength, better dispersion and strong combining ability, will be widely used to instead of steel fibre toreinforce the cement concrete and crack-resistant.

Applying Instruction

1. Ration design of the fibre concrete:

Generally the recommended amount to add to the concrete is more than 2.7kg per sqm (volume ratio is 0.3%), reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete.

2. Length: 54mm for common crack-resistant requirement.

3. Matching Ratio:

Usually, it is no need to Change the matching ratio of the concrete. Considering the requirement of fissure-resistant, the polymer fiber is recommend to combine with the PP fiber mesh form with the volume ratio of 1:1(0.9kg fiber-mesh to per sqm of cement concrete). .

4. Mixer Adoption:

Double-axle horizontal compelling mixer is priority.

5. Mixing process:

Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be properly prolonged to

make fiber com-pletely mixed

6. Shaping & Maintenance:

There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same as the normal concrete.

Specification:

Packing :1kg each PE bag, 10kgs each woven bag, 5500kgs/ 1X20`FCL, 13000kgs/ 1X40`HQ without pallet.

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China.  who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. 

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded. 

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.