New Energy Vehicle Certification for Sustainable Transportation

New Energy Vehicle Product Certification
Basic Introduction
New energy vehicles refer to vehicles that use unconventional vehicle fuels as a power source (or use conventional vehicle fuels and adopt new vehicle power devices), integrate advanced technologies in vehicle power control and drive, and form vehicles with advanced technical principles, new technologies, and new structures.
New energy vehicles include gas vehicles (liquefied natural gas, compressed natural gas), fuel cell electric vehicles (FCEV), pure electric vehicles (BEV), liquefied petroleum gas vehicles, hydrogen energy vehicles, hybrid vehicles (oil and gas hybrid, oil and electricity hybrid), solar vehicles, and other new energy vehicles (such as high-efficiency energy storage devices), etc., and their exhaust emissions are relatively low.
As of the end of 2010, the global natural gas vehicle ownership has exceeded 12.67 million vehicles, and the number of natural gas filling stations has exceeded 18,200. China's natural gas vehicles are developing rapidly, among which LNG (liquefied natural gas) vehicles are growing at an average annual sales rate of more than 20%, and CNG (compressed natural gas) vehicle sales are growing at an average annual sales rate of more than 30%.
In addition to the testing indicators for ordinary cars, the quality certification of new energy vehicles also has some specific testing standards, such as: electric vehicle defrosting, electric vehicle defogging, electric vehicle graphic signs, fuel cell electric vehicle safety technical requirements, electromagnetic radiation intensity, electric vehicle lithium-ion battery performance, electric vehicle lead-acid battery performance, electric vehicle safety requirements, etc., a total of 11 items.
Detection scope
1. Environmental simulation and reliability test:

Hot and cold shock test, temperature and humidity test, three comprehensive tests, salt spray test, composite salt spray test, xenon lamp test, UV ultraviolet test, ozone resistance test, sand and dust test, IP waterproof test, periodic infiltration test, condensation test, boiling test, low pressure test, mold test, air tightness test....

2. Mechanical performance test:

Vibration test, impact test, drop test, simulated automobile transportation, push and pull test, torque test, collision test, plug and pull force test...

3. Optical color and electrical performance test:

Light source performance detection, light intensity measurement, light source spatial light distribution, light source intermediate visual measurement, lamp junction temperature test and life evaluation, light flux maintenance rate and life evaluation...

4. Failure analysis test:

Metallographic section, electrical properties, microscopic observation, scanning electron microscope, energy spectrum, X-ray, ultrasonic...failure mechanism analysis and judgment, product responsibility party judgment.

5. Physical and chemical testing:

Element analysis, organic matter analysis, toxic substance analysis, formula analysis...

6. Battery safety:

Extrusion test, puncture test, tumble test, collision test, immersion test, combustion test, drop test...

7. Non-standard features:

Large-scale equipment and non-standard equipment can be customized for matching and testing.

New energy vehicle product testing and certification standards
Serial number
Standard number
Standard name
1 GB/T4094.2-2005
Signs for electric vehicle controls, indicators and signal devices
2 GB/T18384.1-2001
Electric vehicle safety requirements Part 1: On-board energy storage device
3 GB/T18384.2-2001
Electric vehicle safety requirements Part 2: Functional safety and fault protection
4 GB/T18384.3-2001
Electric vehicle safety requirements Part 3: Personnel electric shock protection
5 GB/T18385-2005
Electric vehicle power performance test method
6 GB/T18386-2005
Electric vehicle energy consumption rate and driving range test method
7 GB/T18387-2008
Limits and test methods for electromagnetic field radiation intensity of electric vehicles Broadband 9KHz-30MHz
8 GB/T18388-2005
Electric vehicle Type test procedures
9 GB/T18488.1-2006
Electric motors and their controllers for electric vehicles Part 1: Technical conditions
10 GB/T18488.2-2006
Electric motors and their controllers for electric vehicles Part 2: Test methods
11 GB/T19750-2005
Type test procedures for hybrid electric vehicles
12 GB/T19751-2005
Safety requirements for hybrid electric vehicles
13 GB/T19752-2005
Hybrid electric vehicles Power performance Test methods
14 GB/T19753-2005
Energy consumption of light hybrid electric vehicles Test methods
15 GB/T19754-2005
Energy consumption of heavy hybrid electric vehicles Test methods
16 GB/T19755-2005
Measurement methods for pollutant emissions of light hybrid electric vehicles
17 GB/T19836-2005
Instruments for electric vehicles
18 GB/T18333.2-2001
Zinc-air batteries for electric road vehicles
19 QC/T741-2006
Supercapacitors for vehicles
20 QC/T742-2006
Lead-acid batteries for electric vehicles
21 QC/T743-2006
Lithium-ion batteries for electric vehicles
22 QC/T744-2006
Nickel metal hydride batteries for electric vehicles

About Us

Shenzhen LCS Compliance Testing Laboratory Ltd., abbr. for LCS, was founded in 2004 in Shenzhen, LCS is now growing into an independent comprehensive third-party institution which focuses on test & certification. Profound technical background and diligent working attitude decided LCS with an outstanding high starting point from the outset，pioneering spirit and consciousness of keeping pace with the times which predestined the thoroughly tempered course of LCS.

Our Labs

LCS Founding Members have engineering background and had gradually built up Safety Lab, EMC Lab, RF Lab, SAR & HAC Lab, Reliability Lab, Lighting Electrical Lab, LED Lighting Performance Lab, Energy Efficiency Lab, Electronic Cigarette Testing Lab, Chemistry Lab, BQTF, Environmental and Occupational Evaluation Lab, Battery Lab, Toy Lab, Textile Lab, Food and Food Grade Material Lab. The establishment of our comprehensive labs ensure our test and certification scope covers almost all fields, such as Reliability and Safety test, EMC test, Chemical Hazardous Substances test, Material Analysis, Food Contact Material test, Bluetooth Test & Certification, Environment and Occupational Health, Performance test of spare parts of Automobile and so on.

Authorization

Moreover, LCS won many authorized qualifications both domestic and overseas. LCS is recognized as IEC/ISO17025 laboratories accepted by CNAS and NVLAP, accredited by CPSC, CMA, accredited for CQC, ISTA, CBTL, SASO, SABS. Meanwhile LCS become laboratory authorized by TUV, BQTF issued by the SIG. LCS had also signed cooperation agreements with FCC, ISED, ETL, CEC, UL, E-Mark, CETECOM, KTC, SAA Approval and many other authoritative institutions, hence we can provide our clients with efficient and professional service for product test and certification.

Experience

Our RF experience ranges from WLAN (802.11b/g/n/a/ac), Wi-Fi 6E, Bluetooth (802.15.1), ZigBee (802.15.4), Z-Wave, UWB (802.15.3), WiMAX (802.16), SRD, DECT, RFID, NFC, GSM, WCDMA (+HSDPA/HSUPA), LTE, 5G (NR/VoNR/eMTC/eMBB/URLLC),UHF/VHF, WHDI, AM, FM, DAB, DVB, GPS, GNSS, COMPASS, GLONASS and more. The products we are mostly working with are basestations, client adapters, laptops, cordless phones, baby monitors, cellulars, radars, sensors, scanners, receivers, immobilizers, remote controls, etc. Modern products incorporate not often one, but a variety of co-existing technologies.

Welcome

LCS is a reliable party. With more than 20 years hands-on experience in the field of Radio, Telecom, EMC and Safety certification, including country approvals worldwide, we will guide you with our knowledge. You are very welcome!

We will be pleased to assist you with your questions or inquiries, please contact us.