| Sign In | Join Free | My entremaqueros.com | 
              
  | 
      
| Categories | Electrical Appliance Testing Equipment | 
|---|---|
| Brand Name: | Sinuo | 
| Model Number: | SN1112 | 
| Certification: | Calibration Certificate (Cost Additional) | 
| Place of Origin: | China | 
| MOQ: | 1 | 
| Price: | Negotiable | 
| Payment Terms: | T/T | 
| Supply Ability: | 20 Sets Per Month | 
| Delivery Time: | 30 Days | 
| Packaging Details: | Plywood Case | 
| Applied Standard: | IEC 60335-1 | 
| Applied Clause: | 25.14 | 
| Test Station: | Single station | 
| Control Method: | PLC control | 
| Flexing Angle: | 0-360°, adjustable | 
| Flexing Speed: | 0-60 cycles/min | 
| Test Cycles: | 0-999999 | 
| Loading Weight: | 5N,10N | 
| Company Info. | 
| Sinuo Testing Equipment Co. , Limited | 
| Verified Supplier | 
| View Contact Details | 
| Product List | 
Clause 25.14 Of IEC 60335-1 Power Cord Flexibility Test Equipment PLC control
Product Information:
Standard: Clause 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements.
Application: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it enters the appliance.
Test sample: small household appliances, such as coffee pot, electric iron, toaster, luminaires and etc.
Feature: The test stations, test angles, load voltage can be customized. The test cycles, speed, voltage, etc., can be preset.
Technical Parameters:
| Input Power | AC220V, 60Hz | 
| Control Method | PLC control, touch screen operation | 
| Station | One | 
| Drive Mode | Electrical | 
| Flexing Angle | 0-360°, preset on the touch screen | 
| Flexing Speed | 0-60 cycles/min, can be preset | 
| Test Cycles | 0-999999, can be preset | 
| Loading Weight | 5N,10N | 
| Loading Voltage | 0-250V, can be regulated | 
| Sample judgment | Judge the conduction by current | 
Common Faults and Treatments:
| No. | Fault | Reason | Treatment | 
1  | Turn on the “Power” switch, but the indicator light not turn on | The external power supply is not connected | Please connect to the external power supply | 
| The fuse is broken | Find out the reason and change the fuse. | ||
| The indicator light damaged | Replace the light | ||
2  | Turn on the “Power” switch, Touchscreen not work | The internal DC24V power supply is in problem | Replace the DC24V power supply | 
| Touchscreen damaged | Replace the touchscreen | ||
| 3 | Touchscreen no response | Connection to PLC loose | Reconnect | 
| Touchscreen damaged | Replace the touchscreen | ||
| 4 | Load power no power supply | Load socket damaged | Replace the socket | 
| The fuse is broken | Change the fuse | ||
5  | Press down “Start” button, but the manipulators do not work.  | The display value and preset value of test times are the same | Press “Count Cleared” button | 
| The E-STOP button is not reset | Release E-STOP button | ||
| There is foreign object in the machine, the machinery is stuck | Remove the foreign object | ||
| It is not under auto test mode | Press “Start” button | ||
| Connection to motor loosen | Reconnect | ||
| Not in starting position | Homing | ||
| 6 | Noise | Swivel speed low or too high | Reset the speed | 
| Connection to motor loosen | Reconnect | 



                                 
                             |